Time Between Pulses - This option sets the delay time between pulses. This is the delay put in place to recharge the internal air reservoir. This is a global setting and effects all pulsing modes including manual pulsing, automatic shut down pulsing, and automatic running pulsing.
This value is measured seconds.
To change the value, use the 'Increment Up' and 'Increment Down' buttons to change the setting by 0.1 in. H 2 O. By touching the numerical display, a keypad will appear on the screen which can be used to enter the number directly.
Once the setting has been selected, the value must be written to the units by pressing the 'SET' button. If this button is not pressed, this setting will not take effect.
Unit Start Up Delay Time - This option sets the delay time between unit start up and the initial shutdown delay. This is the delay put in place to prevent multiple units from starting up simultaneously during the 'Start All' sequence and to prevent a secondary start during the 'Stop All' sequence.
This value is measured seconds.
To change the value, use the 'Increment Up' and 'Increment Down' buttons to change the setting by 0.1 in. H 2 O. By touching the numerical display, a keypad will appear on the screen which can be used to enter the number directly.
Copyright © Clean Air America, Inc.
Weld Station User Manual, March 2011
Page 84 of 137
Made with FlippingBook Annual report maker