Wire numbers have been added to the wiring diagram to aid in both the diagnostic issues as well as the maintenance and service issues while in the field.
The wire numbers will be shown in small Black numbers at each end of the wire. The wires are be numbered by the 'node', meaning that several wires connecting into one point will have the same number. Labels are placed on the terminal blocks as well as the wires.
Starting in December of 2009, Clean Air Industries switched over to LED lighting to reduce operating costs and provide a greener system.
A Dual WeldStation may be equipped with one or two lights for each booth. A second light may be added after the Dual WeldStation has been installed for additional lighting. Your Clean Air Industries sales representative can help in arranging this addition. Wiring for Remote Start / Stop buttons, Remote Safety buttons, and the Economizer TM are shown on the wiring diagram. Multiple electrical options / accessories are available for the Dual WeldStation . If an electrical option has been added, then see the ' Dual WeldStation Users Manual' for additional information.
Page 113
clean-air.com
sales@clean-air.com
1-866-665-1829
Made with FlippingBook. PDF to flipbook with ease