I NSTALLING THE H OLE P LUGS
Once the unit is fully assembled and operational, place all of wire track hole plugs into the sides and back of the unit. There is a 'T' shaped wire track built into the bottom of the plenum. Each end of the 'T' had an exposed 1-1/2" circular opening.
Each side of the main unit and secondary booth has a circular opening.
The back of the main unit and secondary booth each have a circular opening.
Simply press the open side of the plug into the circular opening. It will lock in place.
It may be necessary to install the hole plugs before setting the units in the final location. Obstructions such as walls or other Weld Stations my prevent or hinder access.
Page 42
clean-air.com
sales@clean-air.com
1-866-665-1829
Made with FlippingBook. PDF to flipbook with ease