M ODE S ELECTOR S WITCH
This switch controls the mode of the unit.
The Dual WeldStation tion in Automatic mode and allows the economizer to function. “Auto” position sets
The “0” position stops the Dual WeldStation operation. The “Man.” position sets the Dual WeldStation into Manual Override mode and allows and runs the motor without any effects of the economizer or sleep function. The optional remote mode switch can be installed to control operation of the mode from a second location. The unit can be started or stopped from the secondary location, but a hierarchy for modes is used. The stop function always has highest priority, the manual mode second, and automatic last. See the wiring diagram for wiring of the remote mode switch installation. The Clean Air Economizer TM switch can be installed to control operation of the Dual WeldStation based on welding. Multiple Economizers TM can be wired in parallel. The unit can be started from either location; however, the unit can only be manually stopped by pressing switching the mode to "0". The unit will stop automatically based on the Economizer TM timer. See the wiring diagram for wiring of the economizer mode switch installation.
Page 52
clean-air.com
sales@clean-air.com
1-866-665-1829
Made with FlippingBook. PDF to flipbook with ease