SyncroFlo Environmental Enclosures_lr


FOR WHERE IT REALLY MATTERS We understand that architects are giving less and less floor space to pumping equipment and we have the solution for your application. Syncroflo frequently provides environmental enclosures to protect pumping equipment from the elements. We can provide enclosures to meet wind loads to 200 MPH meeting the Miami Dade hurricane requirements and live loads up to 200 PSI. With various enclosure options from plain fiberglass types to complete metal structures we can meet any requirement. All our enclosures come with a state P.E. Stamp , Seismic calculations and state industrial building code labels as required. Enclosures will have full electrical distribution and HVAC Systems and accessories as specified. WHY A SYNCROFLO PRE PACKAGED SYSTEM? All SyncroFlo systems are manufactured to the highest standards. The 155,000 square foot facility is ISO 9001-2008 certified. All systems bear the UL label, are NSF-61 certified by IAPMO and have the low led certification for potable water. Control panels are assembled in a UL 508 panel shop with QR (Quick Reference) code identification for web based access to the project documents. All systems are factory tested in a NIST traceable test stand and the results are recorded for generation of an XY plot.

QUALITY CONTROL AND TESTING! SyncroFlo’s quality control program is on the leading edge of technology for our industry. Each system is tracked at all stages of manufacturing, assembly and testing with web based reporting via hand held devices. All welding is performed by AWS or ASME certified welders. Once manufacturing and assembly are complete, the system is connected to our NIST certified test stand. We then hydrostatically test and flow test from zero to 100% of design and under specified suction and net delivery pressures. Once on site, your only surprise is how easy the system is to startup and commission.


SyncroFlo, Inc.

2905 Pacific Drive Norcross, GA 30071 Tel: (770) 447-4443


Various options to meet any environmental requirement

All third party labeled

State P.E.Stamp, Siesmic calculations and state building code labels standard.

Genset with ATS options available

Service entrance rated disconnects

complete electrical distribution systems

OSHA approved rubber safety mats in electrical areas.

UL 508 Listed system controls

Various flooring options

Hoist and trolly system for system service

ENCLOSURE TYPES Steel, Fiberglass, Steel with foam core and precast concrete

COMMON OPTIONS INCLUDE:  • 1 & 2 Hour rated fire walls • Floor drain systems • Sprinkler systems and/or fire extinguishers • Interior and exterior lighting • Emergency lighting • Intake louvers and exhaust fans • Heating units • Air conditioning units • Humidifier and de-humidifers

• Smoke and CO2 detectors • Refrigerant monitors

• SCBA's per ASHRE 15-2004 requirements • Roof hatches and roll up doors for system service • Various conduit options • Positive pressure enclosure's for classified areas • Blast proof enclosures


Page 1 Page 2

Made with FlippingBook - Online catalogs