36_37
Pipe extractor Special metal component that enables us to replace the plastic pipes in case of failure. There are two bolts with threading in their bodies and a specially shaped head with perforations in the center from which a wire passes and ends at both ends. The two bolts are placed back-to-back. The set includes two rings. Usage On the pipe that we want to replace, we firstly pass the ring and then tighten one bolt to the inner diameter of the pipe until it stops at the end. We do the exact same thing to the new pipe by tightening the other end. After this we can pull the problematic pipe from its other end and by pulling it into its place it will penetrate into the new pipe. Production material is st 37 – 2 (370 Kp/mm2)
Como-pex BRASS FITTINGS PEX pipe connection fittings
Our company manufactures a full range of connection fittings for cross-linked polyethylene pipes. The following products are available:
Male, female and connecting coupling. Male, female and connecting tee Male, female and wall plate elbow Wall plate elbow. Mini-ball valves for plastic pipe.
Connector Male
A
A B D G F DIMENSIONS
Φ 15χ1/2”χ1,5
37 21 24 1/2” 9,8
37,5
21 24 1/2” 11,8
Φ 16χ1/2”χ2,0
36 21 24 1/2” 11,4
Φ 16χ1/2”χ2,2
39 25 27 1/2” 12,8
Φ 17χ1/2”χ2,0
39 25 27 1/2”
13,8
Φ 18χ1/2”χ2,0
DIMENSIONS SW Φ 15χ2.5 13 Φ 16χ2 13 Φ 18χ2 15 Φ 18χ2.5 15 Φ 20χ2.0 17
39 25 27 1/2” 12,8
Φ 18χ1/2”χ2,5
39 25 27 3/4”
13,8
Φ 18χ3/4”χ2,0
39 25
27
3/4” 12,8
Φ 18χ3/4”χ2,5
40 27
30 1/2” 15,8
Φ 20χ1/2”χ2,0
40 27
30
1/2” 14,2
Φ 20χ1/2”χ2,8
40 27
30 3/4” 15,8
Φ 20χ3/4”χ2,0
41 27
30 3/4“ 14,2
Φ 20χ3/4”χ2,8
44 29
32 3/4” 15,8
Φ 22χ3/4”χ3,0
45,5
33
37 3/4” 20,8
Φ 25χ3/4”χ2,3
45
33 37 3/4” 17,8
Φ 25χ3/4”χ3,5
49
38 40
1” 20,2
Φ 25χ1”χ2,3
45
33 37 3/4” 21,8
Φ 28χ3/4”χ3,0
49
38 40
1”
21,8
Φ 28χ1”χ3,0
49
38
43
1”
25,8
Φ 32χ1”χ3,0
Made with FlippingBook Annual report