W ARNINGS AND L ABELS
HIGH VOLTAGE: The voltage of the WeldStation is
dangerous once connected to a power supply. Incorrect
installation may cause damage to the equipment, serious
injury, or death. Consequently, it is essential to comply with
instructions in this manual, local and national safety rules, and
follow all safety procedures including proper lock out and tag
out procedures.
Hazardous Voltage: The Variable Frequency Drive (VFD)
uses large capacitors which can hold a charge long after the
power disconnect has been used to disconnect power from the
unit. Do not service the panel until the VFD has fully
discharged.
GROUND CONNECTION: Proper grounding of the equipment
and electrical panel is essential. Do not attempt to operate the
equipment without electrically grounding the panel. The
connection to the earth ground must be proper and provide a
low impedance path to the earth to prevent hazardous
voltages from appearing on equipment
Page 18 of 83
1-866-665-1829
clean-air.com
sales@clean-air.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online