B RINGING THE M AIN U NIT U PRIGHT , N O L IFTING T OOL
NOTE:
Please be sure the chain
hoist, come along, or
chain/cable, is rated for
that amount of weight to
be lifted.
Properly sized chain or cable can be
attached to header bar on a fork lift
truck. The chain or cable can then be
connected to the lifting lugs of the
unit. The forklift truck can then be
used to lift and move the unit.
Other methods include attaching a
chain hoist or come along, or both to
the eyelets provided at the top of the
unit.
When the unit is being lifted, the
bottom of the unit may shift. If
possible, brace the bottom of the
unit to prevent slipping.
A '2 x 4' brace is fastened to the front
floor flanges of the booth. This is used
during shipment to prevent the
collapse of the booth side walls. This
'2 x 4' should be kept in place while
bringing the unit upright to prevent
damage.
SLOWLY hoist the unit up, supporting
it whenever and wherever possible.
DO NOT let the unit slam suddenly
when bringing the unit into the upright
position. This can cause damage to the unit.
Page 21 of 83
1-866-665-1829
clean-air.com
sales@clean-air.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online