B RINGING THE M AIN U NIT U PRIGHT , W ITH L IFTING T OOL
NOTE:
Please be sure the chain
hoist, come along, or
chain/cable, is rated for that
amount of weight to be
lifted.
Properly sized chain or cable can be
attached to a lifting tool on a fork lift truck.
The chain or cable can then be connected
to the lifting lugs of the unit. The forklift
truck can then be used to lift and raise the
unit.
Other methods include attaching a chain
hoist or come along, or both to the eyelets
provided at the top of the unit.
When the unit is being lifted, the bottom of
the unit may shift. If possible, brace the
bottom of the unit to prevent slipping.
A '2 x 4' brace is fastened to the front floor
flanges of the booth. This used during
shipment to prevent the collapse of the
booth side walls. This '2 x 4' should be
kept in place while bringing the unit
upright to prevent damage.
SLOWLY hoist the unit up, supporting it
whenever and wherever possible.
DO NOT let the unit slam suddenly when
bringing the unit into the upright position.
This can cause damage to the unit.
If risers are being used, then attach the
risers before bringing the unit upright. See
Page 23 of 83
1-866-665-1829
clean-air.com
sales@clean-air.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online