If the spark baffles are already
installed, remove them. See the
'Removing the Spark Baffles' section
of the user manual.
Place the main unit in the final
location. This may require bolting on
some of the cover plates before
placement due to obstructions. If
risers are being used, they must be
installed on the unit before final
placement.
Place the secondary booth next to
the main unit. This may require
bolting on some of the cover plates
before placement due to
obstructions. If risers are being
used, they must be installed on the
booth before final placement.
Slide the secondary booth into place
and align the plenum openings and
bolt hole patterns.
Each rectangular opening has a ten
hole bolt pattern. Fasten the
secondary booth to the main unit
using (10) 1/4" - 20 x 1.0" black
socket head cap screw, (20) black
1/4" flat washers, (10) black 1/4"
lock washers, and (10) black 1/4"-20
nuts.
Page 30 of 83
1-866-665-1829
clean-air.com
sales@clean-air.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online