I NSTALLING THE H OLE P LUGS
Once the unit is fully assembled and
operational, place all of wire track hole
plugs into the sides and back of the unit.
There is a 'T' shaped wire track built into
the bottom of the plenum. Each end of the
'T' had an exposed 1-1/2" circular
opening.
Each side of the main unit and secondary
booth has a circular opening.
The back of the main unit and secondary
booth each has a circular opening.
Simply press the open side of the plug
into the circular opening. It will lock in
place.
It may be necessary to install the hole
plugs before setting the units in the final
location. Obstructions such as walls or
other WeldStations may prevent or hinder
access.
Page 39 of 83
1-866-665-1829
clean-air.com
sales@clean-air.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online