M ODE S ELECTOR S WITCH
This switch controls the mode of the unit.
The “ Auto ” position sets the WeldStation in
Automatic mode and allows the economizer to function.
The “ 0 ” position stops the WeldStation
operation.
The “ Man. ” position sets the WeldStation into
Manual Override mode and allows and runs the motor without any effects of the economizer
or sleep function.
The optional remote mode switch can be installed to control operation of the mode from a
second location. The unit can be started or stopped from the secondary location, but a
hierarchy for modes is used. The stop function always has highest priority, the manual mode
second, and automatic last. See the wiring diagram for wiring of the remote mode switch
installation.
The Clean Air Economizer TM switch can be installed to control operation of the WeldStation based on welding. Multiple Economizers TM can be wired in parallel. The unit can be started from either location; however, the unit can only be manually stopped by pressing switching the mode to "0". The unit will stop automatically based on the Economizer TM timer. See the
wiring diagram for wiring of the economizer mode switch installation.
Page 49 of 83
1-866-665-1829
clean-air.com
sales@clean-air.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online