M A G A Z I N E
getting them in order and making sure the certificates all match up.
standard…well, we had eight years’ experience and customers on the books.” Audit Initial auditing of Galway’s knowledge and safety procedures was rigorous. “We went through a stringent audit process here for six months,” says Sean. “We had an auditor who had 15 years’ experience at the Food and Drugs Authority (FDA). “He grilled us from top to bottom and it was the best thing we ever did. Anyone could come in and audit us now – we’ve done it once, we can do it again. “We had three solid days where all we did was make a hose and test a hose; make a hose and test a hose, all for a five-minute process. “Jim asked question after question and he was great because we had to address his concerns. You don’t learn how to use this overnight. “You have to build up your experience as well as building up your customer base. There’s no point using this rig (the Resato type SLU) if you’re only testing 20 or 30 hoses a year.” Marketing Pirtek Galway’s customer base is evolving. “Hose testing started from us getting into the high-end stuff, Sean says. “Such clients won’t accept
hoses without a test certificate for every single one.”
“You have to relate the test back to the hose number and the invoice.” Every hose that’s tested is numbered and has its own test certificate. “That’s why we’re etching ferrules with the Pirtek brand and number,” says Sean. “We populate the certificate with the hose number and work order number. The form shows who tested the hose, the device and the serial number.”
Hose testing may not be for all customers, however, and this affects your marketing, says Sean. “When you say to an average client ‘Your hose is going to cost x or y to test,’ they may see it as not worth it and walk away, so you need to be targeting the right potential customers.
“Someone else could test it for less but they may not be doing it properly and they may not be producing the certificates. Without them, it’s worthless.
‘You need to be targeting the right customers’
The device must have a calibration certificate in order to produce valid test results.
“If you cannot relate the form back to the
“We have hydraulic hoses that can’t go into certain places – factories for example – without the correct test certificate.”
device serial number, the certificate is null and void. If the calibration certificate is out, you might as well not be testing,” says Sean. “Customers want that verifiable, traceable certificate stating, ‘We certify that this hose has been tested with reference to BS 7751 and ISO 1402’. These are our bible. Twice the working pressure for 30 seconds. Up in a minute, hold for thirty seconds, down to zero,” Sean continues. “You have to show peak pressures, time durations, dates, serial number, reference number and your hose number and you need a signature. “It took us eight years to get to where we are today,” says Sean. “We started off with small, non-recordable rigs, but as you start moving up the chain, clients want proof. It doesn’t matter what you do, that proof – the software that provides it – costs money.”
Demand is increasing for hydraulic hoses, Sean says. “What we’re noticing is that this rigorous attitude is making its way down the food chain.” Certification and accountability Hose testing is premised on certifiability and in recent years, the demand for hose certificates has increased.
Hoses need to be tested, and this needs to be verifiable, as Sean explains.
“This is especially true in the oil, gas and pharmaceutical industries,” he says, “where safety and reliability are crucial and detailed documentation on pressure tests of industrial hose assemblies is required.
“It’s not just testing hoses,” Sean says, “it’s getting them in, tagging, cataloguing,
UK 0800 38 24 38 ROI 1800 74 78 35 www.pirtek.eu
17
Made with FlippingBook Learn more on our blog