SyncroFlo, Inc.
2905 Pacific Drive Norcross, GA 30071 Tel: (770) 447-4443 www.syncroflo.com
HVAC PUMP PRODUCT RANGE FOR WHERE IT REALLY MATTERS
MULTISTREAM
UNISTREAM
INSTREAM
THRUSTREAM
CONFIGURATION Vertical close coupled electric motor driven
CONFIGURATION Consists of a number of ring section diffuser casings bolted suction & delivery casing
CONFIGURATION Horizontal electric motor or engine driven
CONFIGURATION Horizontal, vertical open shaft, vertical direct mounted electric motor or horizontal electric motor or engine driven DISCHARGE & PERFORMANCE 2.5 in to 12 in Outputs up to 15410 gpm Heads up to 984 ft FEATURES Axially split casing - rotating element can be removed without disturbing pipework High hydraulic efficiencies Double entry impellers reduce end thrust, increase efficiency & bearing life Shaft sleeves fitted as standard for soft packed pumps & an alternative for mechanical seals. Stainless steel shafts fitted as standard for mechanical seals 40 models. Module design for maximum interchangeability Grease lubrication Soft packing or mechanical seals Suitable for baseplate mounting with coupling Approved to LPCB, FM and/or UL standards In compliance with NFPA 20
DISCHARGE & PERFORMANCE CD Delivery 4 in to 5 in CD Outputs up to 2200 gpm CD Heads up to 870 psi (Fire app.) RKB Delivery 1.25 in to 1 in RKB Outputs up to 3742 gpm RKB Heads up to 2788 ft RKB for industrial applications Mechanical seal or gland packed Suction flange oriented left or right Vertical mounting Low NPSH Available as a canned or vertical turbine type arrangements Approved to LPCB, FM and/or UL standards, all of which are compliant to NFPA 20 FEATURES CD for fire applications
DISCHARGE & PERFORMANCE 1.25 in to 6 in Outputs up to 2220 gpm Heads up to 345 ft FEATURES Horizontal DIN 24255 Electric Motor 41 models Wide choice of materials Centreline discharge Back pull-out rotating element can be removed w/o disturbing pipe work Impellers cut to duty High interchangeability – (3) shaft modules cover the entire range Suitable for baseplate mounting with coupling Approved to LPCB, FM and/or UL Standards In compliance with NFPA 20 Used in pump as turbine applications
DISCHARGE & PERFORMANCE 1.5 in to 4 in Outputs up to 950 gpm Heads up to 213 ft
FEATURES Close coupled in-line design Simple installation and easy service back pull-out design Cost-effective solution
W
TEFC IE2 motors fitted as standard High interchangeability – rotating element will interchange with Eurostream Mechanical seal as standard Impellers cut to duty
HVAC PUMP PRODUCT RANGE
SyncroFlo, Inc.
2905 Pacific Drive Norcross, GA 30071 Tel: (770) 447- 4443 www.syncroflo.com
HVAC PUMP PRODUCT RANGE
TURBOSTREAM
TRIPLE DUTY VALVE
SUCTION DIFFUSER
CONFIGURATION Vertical lineshaft, vertical electro submersible, vertical electric motor or engine driven, dry or wet well
GENERAL DESCRIPTION In addition to its ability to act as the system’s isolation valve and backflow prevention through its check feature, the SyncroFlo Triple Duty Valve also acts as a balancing valve. This ensures a uniform flowrate throughout the system. Due to the split design, this valve can be constructed in both inline and 90° configurations. This allows for greater variance to meet the user’s needs. FEATURES Performs as spring-loaded non-slam check, balancing, shut-off, priming through bypass and throttling valve Soft seated externally guided disc ensures a leak tight seal Mating threaded parts are dissimilar non-galling materials Product engineered using CFD technique to reduce pressure drop Re-positional inlet body viz. two types of mounting arrangement I-type (180˚ angle) and L-type (90˚ angle) NPT drain plug at the inlet and outlet body. Contains a built-in bypass valve allowing for drainage of water upstream of the check valve. (The bypass valve MUST BE CLOSED at all times in normal operation and should ONLY be used by authorized personnel to drain water from the piping above) Lesser room space compared to conventional pumping system
INDUSTRY OIL & GAS GE ERAL DESCRIPTION Suction Diffusers take turbulent water, passing it through a straining screen and a reduced-port orifice, to produce a more laminar flow pattern. This in turn increases a pump’s performance and life expectancy. In addition to improving performance, the straining screen also acts as a filter, removing particulate that may appear in your system. FEATURES No separate strainers and 90˚ Elbow required. Variable inlet and outlet sizes to suit pipe fitting. Removable SS-304 fine mesh serves as a filtering element. Baffles straightens flow, reduce turbulence and guides flow to pumping unit. Product engineered using CFD technique to reduce pressure drop. Less room space as it can be directly bolted to the suction side of the pumping unit. Designed with reduced delivery diameter, separate reducers are eliminated. Drain arrangement for online maintenance as well as bosses for pressure gauges at the inlet and outlet flanges Adjustable support and easy maintenance
DISCHARGE & PERFORMANCE 4 in to 86 in Outputs up to 176115 gpm Heads up to 656 ft
FEATURES Space saving
Low maintenance costs High hydraulic efficiency Priming problems eliminated. Pump end submerged in liquid 60 models, with bowls, heads and columns optimised for performance and cost Wide choice of materials Diffuser bowls ensure balanced axial loading Soft packing or mechanical seals API construction Approved to FM and UL standards, all of which are compliant to NFPA 20 Nuclear certification Dry and wet well installations
SyncroFlo, Inc.
PROVIDING PUMPING SYSTEM SOLUTIONS, FOR WHERE IT REALLY MATTERS.
Page 1 Page 2Made with FlippingBook flipbook maker