2020 Festool Cordless Catalog

Cordless 2020

Tools for the Toughest Demands

Powerful With 1593 in-lb (180 Nm) of torque and extremely powerful, brushless EC-TEC motor with three speed levels.

Compact design Machine weight at just 3.3 lbs (1.5 kg)* for low fatigue, work even in hard to reach areas. *When equipped with BP 18 Li 4.0 Ah Battery.

T-mode For controlled work with self-driving screws.

TID 18 Impact Driver

NEW

This compact powerhouse offers an impressive service life thanks to its extremely robust hammer mechanism. The perfect combination of the new generation brushless EC-TEC motor and 4.0 Ah battery pack ensure maximum performance and endurance. The only Impact to match your drive!

9 ways to buy! TID 18 Impact Driver

Strengths & Benefits •

Robust: Long lasting quality components, fully covered thanks to the comprehensive support provided by Festool Service. • Maximum power: Thanks to the extremely powerful, brushless, and therefore long lasting, new generation EC-TEC motor with three speed levels, and T mode specifically for self tapping screws. • Kickback free hammer mechanism drives the fastener rather than spinning the drill around the screw thus protecting your wrist. • Ergonomic: compact design enables you to work accurately and for longer periods without becoming tired, even in hard to reach areas. • Convenient: Tool free 1/4” holder, integrated bit storage, optimum LED illumination of the work area, and belt clip for attachment on both sides. • Mobile: Packed in a Systainer, the TID 18 can be integrated perfectly into the Festool system of tool storage.

TID 18

Cordless Impact Driver Basic TID 18-Basic Belt clip; Bare tool without battery pack; Without charger; Systainer SYS3 M 187.

$199.00 576479

Cordless Impact Driver Compact Set TID 18 HPC 4,0 I-C Set Belt clip; (2) BP 18 Li 4.0 HPC-ASI battery pack; Rapid charger TCL 6; Systainer SYS3 M 187.

$349.00 576480

TID 18 Accessories

Bit Cassette

BT-IMP SORT2 Magnetic Bit Holder and five different impact-rated 1” (25 mm) bits to include Phillips, Torx, and Square Drive bits in holder with belt clip. Includes: Magnetic Impact Bit Holder, PH 2 bit, PH 3 bit, TX 25 bit, TX 30 bit, SQ 2 bit

$20.00 204382

Bit Cassette

BT-IMP SORT4 Featuring a lockable impact-rated bit holder and five different impact-rated 1” (25 mm) bits to include Phillips, Torx, and Square Drive in holder with belt clip. Includes: Lockable Impact Bit Holder 1/4”, PH 2 bit, PH 3 bit, TX 25 bit, TX 30 bit, SQ 2 bit

$38.00 204384

Bit Cassette

BT-IMP SORT6 With six different impact-rated 2” (50 mm) bit types including Torx bits, Phillips bits, and a Square Drive bit, the assortment covers all typical applications. Includes: PH 2 bit, PH 3 bit, TX 20 bit, TX 25 bit, TX 30 bit, SQ 2 bit

$39.00 204386

Socket Spanner Set

HighPower Battery Pack BP 18 Li 4.0 HPC-ASI Li-HighPower cell technology makes it powerful enough for every application. At just 1.2 lbs (600 g), it is 20% lighter and 50% more compact than a 5.2 Ah battery pack. Bluetooth® enables the compatible CLEANTEC mobile dust extractor to be started automatically when the cordless tool is activated. STSL-IMP 1/4”-Set Ideal for screwing in and unscrewing hexagon screws. Includes: Socket spanners - (1x) 1/4” Hexagonal holder, (1x) 5/16” Hexagonal holder, (1x) 3/8” Hexagonal holder

$37.00 204388

$120.00 205036

Battery Pack BP 18 Li 5.2 ASI

Powerful 5.2 Ah battery for endurance and power. The all-rounder for all applications. Integrated LED display on the battery pack provides charge status at all times. Bluetooth® enables the compatible CLEANTEC mobile dust extractor to be started automatically when the cordless tool is activated.

$130.00 202480

Rapid Charger TCL 6

For Li-ion battery packs (except for CXS/TXS). LED display shows the remaining battery life and charge status. Space-saving with a secure cord holder. Simple wall mounting through elongated holes on the rear.

$75.00 201138

Rapid Charger SCA 8

Faster re-charge for less down time. AIRSTREAM batteries with the SCA 8 charger re-charge 60% faster than previous charging technology. And batteries equipped with AIRSTREAM design cool down 3X faster than non- equipped versions, so the charging process can begin sooner, getting you back to work faster.

$100.00 200313

TID Sets Sets NEW

TID 18 + PDC 18

$599.00 576490

(2) Belt clips; (2) BP 18 Li 4.0 HPC-ASI battery pack; Rapid Charger TCL 6; Right angle chuck; Auxiliary handle; Systainer SYS3 M 237.

TID 18 + T 18

(2) Belt clips; (2) BP 18 Li 4.0 HPC-ASI battery pack; Rapid Charger TCL 6; Keyless chuck; Systainer SYS3 M 237. $549.00 576494

Finish PRO Pack NEW $1,499.00 205604

Finish PRO Pack - Tools Included

TID 18 Impact Driver

TSC 55 Track Saw

PSC 420 Jigsaw

T 18 Drill

SYS 5 T-LOC

SYS3 M 187

SYS3 M 237

Finish PRO Pack - Accessories Included

BP 18 Li 4.0 HPC-ASI (2x) Battery Pack

BP 18 Li 5.2 ASI (2x) Battery Pack

TCL 6 Rapid Charger

SCA 8 Rapid Charger

T18 Right Angle Chuck

28-tooth blade

Jigsaw 25-blade assortment pack

SYS 1

SYS Toolbox

TID Combo Kits Combo Kits NEW

TID 18 + TSC 55

TID 18 in SYS 3 M 187; TSC 55 in SYS 5; (2) BP 18 Li 5.2 ASI battery pack; Rapid Charger SCA 8; SYS 1; Dust bag; 48-tooth blade; 28-tooth blade. $875.00 205601

TID 18 + HKC

TID 18 in SYS 3 M 187; HKC 55 in SYS 4; FSK 250 Rail; (2) BP 18 Li 5.2 ASI battery pack; Rapid Charger TCL 6; SYS 1; 18-tooth blade; 12-tooth blade. $875.00 205602

TID 18 + PSC 420

$699.00 205603

TID 18 in SYS 3 M 187; PSC 420 in SYS 3 M 187; (2) BP 18 Li 4.0 HPC-ASI battery pack; Rapid Charger TCL 6; SYS 1; Jigsaw 25-blade assortment pack.

Remodeler PRO Pack NEW $1,799.00 205605

Remodeler PRO Pack - Tools Included

TID 18 Impact Driver PDC 18 Drill

HKC 55 Track Saw

OSC 18 Oscillating Multi-Tool

SYS 4 T-LOC

SYS3 M 237

SYS3 M 187

Remodeler PRO Pack - Accessories Included

BP 18 Li 4.0 HPC-ASI (2x) Battery Pack

BP 18 Li 5.2 ASI (2x) Battery Pack

PDC Right Angle Chuck

TCL 6 (2x) Rapid Charger

Vecturo Blades USB 78/32 5-pack

12-tooth blade

SYS 1

SYS Toolbox

T 18+3-E Drill Driver

NEW

Experience full power when drilling and screwdriving: the completely electronic torque adjustment can handle any drilling or screwdriving task. The combination of the Li-HighPower battery pack and maintenance-free brushless EC-TEC motor means that the T 18+3-E cordless drill is light, long-lasting and durable. The quick drilling solution. Powered for smarter, faster, longer use.

Powerful The workhorse of any shop or jobsite boasting the power you need to get the job done faster and easier.

Precise Electronic torque setting means precise screw driving every time.

Robust Long-lasting quality components, fully covered thanks to the comprehensive support provided by Festool Service - 3 year wear- and-tear warranty.

Warranty all-inclusive. 3-Year Wear-and-Tear Warranty on your Tool, Battery and Charger. Buy with confidence.

Strengths & Benefits •

Robust: Long lasting quality components, fully covered, including wear and tear, thanks to the comprehensive support provided by Festool Service. • Maximum power: Thanks to the extremely powerful, brushless, and therefore long lasting, latest generation EC-TEC motor. • Convenient: Keyless metal chuck with a range up to ½” capacity, integrated bit storage, optimum LED illumination of the work area, and belt clip for attachment on both sides. • Mobile: Packed in a Systainer, the T 18+3-E can be integrated perfectly into the your Festool system of tool storage.

T 18+3-E

Cordless T 18+3-E Basic Belt clip; Bare tool without battery pack; Without charger; Systainer SYS3 M 187.

$199.00 576758

Cordless T 18+3-E Plus Belt clip; (2) BP 18 Li 4.0 HPC-ASI battery pack; Rapid charger TCL 6; Systainer SYS3 M 187.

$299.00 576754

T 18+3-E Accessories

HighPower Battery Pack BP 18 Li 4.0 HPC-ASI Li-HighPower cell technology makes it powerful enough for every application. At just 1.2 lbs (600 g), it is 20% lighter and 50% more compact than a 5.2 Ah battery pack. Bluetooth® enables the compatible CLEANTEC mobile dust extractor to be started automatically when the cordless tool is activated.

$120.00 205036

Battery Pack BP 18 Li 5.2 ASI

Powerful 5.2 Ah battery for endurance and power. The all-rounder for all applications. Integrated LED display on the battery pack provides charge status at all times. Bluetooth® enables the compatible CLEANTEC mobile dust extractor to be started automatically when the cordless tool is activated.

$130.00 202480

Rapid Charger TCL 6

For Li-ion battery packs (except for CXS/TXS). LED display shows the remaining battery life and charge status. Space-saving with a secure cord holder. Simple wall mounting through elongated holes on the rear.

$75.00 201138

Rapid Charger SCA 8

Faster re-charge for less down time. AIRSTREAM batteries with the SCA 8 charger re-charge 60% faster than previous charging technology. And batteries equipped with AIRSTREAM design cool down 3X faster than non- equipped versions, so the charging process can begin sooner, getting you back to work faster.

$100.00 200313

T 18+3 / C 18 Drill Driver

FastFix Interchangeable Chucks FastFix tool-less chuck exchange system dramatically expands the range of the T-Drills and C-Drills, taking the place of five different tools.

Durability With German build

quality and a virtually indestructible motor, you’ll be hard-pressed to break this machine.

Brushless motor technology

Brushless motors deliver longer run times, more screws per charge and a significantly longer service life. Also equipped with thermal protection and low battery indicator.

Light, powerful and durable design that deliver at every level. Thanks to Festool's innovative FastFix chuck system, the T-Series and C-Series cordless drill is incredibly versatile and does the work of five drills in one. For corners and against adjoining edges, drill and driver bits up to 1/2" in diameter, lighter Centrotec chuck with its full array of interchangeable drill and driver bits, 90° angle to the drive motor for tight spaces, optional depth stop chuck provides consistent, precise depth settings regardless of workpiece material.

30 DAYS Risk-Free TRY IT!

Strengths & Benefits •

Brushless motors deliver longer run times, more screws per charge and a significantly longer service life. • Internal sensors immediately disengage the drill motor once the desired torque setting has been achieved, preventing overdriving and stripping. • FastFix tool-less chuck exchange system dramatically expands the range, taking the place of five different tools.

T 18+3

Cordless T 18+3 Basic

Belt clip; Bare tool without battery pack; Without charger; Systainer SYS3 M 187.

$299.00 576451

Cordless T 18+3 Set Belt clip; (2) BP 18 Li 4.0 HPC-ASI battery pack; Rapid charger TCL 6; Right angle chuck; Systainer SYS3 M 187.

$499.00 576457

C 18

Cordless C 18 Basic

Belt clip; Bare tool without battery pack; Without charger; Systainer SYS3 M 187.

$299.00 576439

Cordless C 18 Set Belt clip; (2) BP 18 Li 4.0 HPC-ASI battery pack; Rapid charger TCL 6; Right angle chuck; Systainer SYS3 M 187.

$499.00 576444

T 18+3 and C 18 Accessories INTERCHANGEABLE CHUCKS

Standard replacement chuck for the PDC Drill. Up to 1/2” capacity. Ratcheting sleeve for increased retention. Keyless Chuck

$78.00 769067

Keyless Chuck for CXS drill with FastFix interface. 1/32” (1 mm)–3/8” (10 mm). Keyless Chuck

$74.00 499949

Centrotec Chuck Quick-release chuck provides two points of contact for bits and accessories. Using Centrotec accessories, precision-milled sleeve acts like bushing, prevents wobble. Right-Angle Chuck for close quarters. 1/4” Hex drive with magnet accepts 1/4” driver tips. Also accepts Centrotec and FastFix Keyless Chuck. Angle Attachment Offset, Eccentric Chuck places bit flush to the side, allows drilling/driving right into corners. Chuck rotates 360° with 16 presets. Quick-release collar will not mar adjoining surfaces. FastFix Eccentric Chuck Right-Angle Chuck for close quarters. 1/4” Hex drive with wire detent, also accepts Centrotec or Keyless Chuck. Chuck rotates 360° with 16 presets. FastFix Angle Chuck

$130.00 490294

$130.00 490293

$115.00 497951

$40.00 492135

CENTROTEC ACCESSORIES

Expand the versatility of the entire Centrotec range of drill bits and drivers with this solution for all hand-driving tasks. Hand Driver Convert any non-Festool drill for use with the Centrotec System using this adapter which fits into a standard Keyless Chuck. Provides a simple way to make any drill compatible with the Centrotec system. Centrotec Adapter Adapt any Centrotec-equipped drill for use with 1/4” sockets. Ball lock for positive connection and socket retention. Adapter Adapt any Centrotec-equipped drill for use with 3/8” sockets. Ball lock for positive connection and socket retention. Adapter

$25.00 200140

$24.00 496450

$24.00 495131

$26.00 495133

PDC 18 Percussion Drill

Tremendous Range Driven by a four-speed gearbox, you can drop it

down low to hog out material, switch to high-speed hammer function to plow through concrete, or just go mid- range for all your common drilling applications. Versatility Supported by its own set of FastFix interchangeable chucks and the complete Centrotec bit change system, it’s easy to see how this might be the only drill you could possibly need. Unbeatable Our unbeatable, industry- leading EC-TEC brushless motor—coupled with proven lithium-ion battery technology—provides long run times as well as jobsite tough durability.

With the PDC 18, Festool set out to create the ultimate drilling machine. A four-speed gearbox provides loads of torque for hogging out material with large diameter drill bits, then quickly switches over to deliver 3,800 RPMs to blast through concrete with its hammer drill functionality. The most durable and versatile drill ever.

Warranty all-inclusive. 3-Year Wear-and-Tear Warranty on your Tool, Battery and Charger. Buy with confidence.

Strengths & Benefits

• Driven by a four-speed gearbox- low to hog out material, high-speed hammer function to plow through concrete, or mid-range for all common drilling applications. • Supported by its own set of FastFix interchangeable chucks and the complete Centrotec bit change system. • EC-TEC brushless motor-coupled with lithium-ion battery technology- provides long run times as well as jobsite tough durability.

PDC 18

Cordless PDC 18 Basic Belt clip; Bare tool without battery pack; Without charger; Systainer SYS3 M 187.

$349.00 576474

Cordless PDC 18 Set Belt clip; (2) BP 18 Li 4.0 HPC-ASI battery pack; Rapid charger TCL 6; Right angle chuck; Systainer SYS3 M 187.

$549.00 576476

PDC 18 Accessories

Angle Attachment Right Angle attachment for right angle drilling and driving.

$135.00 769097

Depth Stop Chuck

Drive screws to a consistent depth using Socket Wrench or any 1/4” hex drive tip. Equipped with replaceable Guard Rings. PH 2 bit included.

$110.00 769126

For use with Depth Stop Chuck (769126).

Guard Ring - 17mm

Rubber ring to help protect soft surfaces when driving fasteners. Internal diameter of 17 mm (21/32”). Guard Ring - 23mm Rubber ring to help protect soft surfaces when driving fasteners. Internal diameter of 23 mm (29/32”).

$6.00 768125

$6.00 768127

Adapter

FastFix Adapter, equipped with 3/8” socket post.

$69.00 769064

Keyless Chuck Standard replacement chuck. Up to 1/2” capacity. Ratcheting sleeve for increased retention.

$78.00 769067

Keyless Chuck Metal-sleeved chuck. Up to 1/2” capacity. Ratcheting sleeve for increased retention.

$69.00 769065

Rubber Bumper Attaches to any 18 V batteries that are supplied with belt hooks. Provides an additional layer of protection, especially for rough site usage. Drilling Dust Nozzle Designed to attach to the surface through suction when paired with a Dust Extractor, capturing dust particles for a cleaner worksite.

$10.00 769240

$23.00 500483

Auxiliary Handle The Side Handle provides ergonomic grip for greater control and comfort.

$15.00 768615

Centrotec Chuck Quick-release chuck provides two points of contact for bits and accessories. Using Centrotec accessories, precision-milled sleeve acts like bushing, prevents wobble.

$40.00 492135

Built for the Toughest Demands. We’ve designed the BHC to withstand the toughest abuse you can dish out, with a powerful motor that’s built to last. You’ll reach your limit before this drill does. Compact, Yet Packs a Punch The compact C-handle design delivers a streamlined pressure point, resulting in greater control and more comfortable handling, while maintaining power and capability, even for hard-to-reach applications. True System Compatibility. Building on our existing 18V platform with 5.2 Ah battery packs, the BHC is further supported by a complete range of SDS bits, Centrotec accessories, plus an accessory drill dust nozzle that offers a cleaner workspace.

BHC 18 Rotary Hammer

Built for the toughest demands. The BHC 18 Rotary Hammer has the best power-to-weight ratio in its class. Combined with a compact and ergonomic C-handle design, the BHC’s light weight and low vibration makes for efficient and comfortable one-handed use, whether for extended periods or even overhead applications. And since a tool like this is going to be pushed to its limits day after day, we’re backing it up with Festool’s exclusive Warranty all-inclusive.

30 DAYS Risk-Free TRY IT!

Strengths & Benefits

• •

The best power-to-weight ratio in its class. Compact and ergonomic C-handle design.

• Light weight and low vibration makes for efficient and comfortable one-handed use, whether for extended periods or overhead applications. • The BHC 18 does not disappoint.

BHC 18

Cordless BHC 18 Basic Belt clip; Bare tool without battery pack; Without charger; Systainer SYS 2 TL .

$399.00 574724

BHC 18 Accessories

Drilling Dust Nozzle Designed to attach to the surface through suction when paired with a Dust Extractor, capturing dust particles for a cleaner worksite.

$23.00 500483

Auxiliary Handle The Side Handle provides ergonomic grip for greater control and comfort.

$15.00 768615

Adapter Allows SDS drive hammerdrills to adapt to Centrotec Chuck and accessories.

$25.00 769068

Centrotec Chuck Quick-release chuck provides two points of contact for bits and accessories. Using Centrotec accessories, precision-milled sleeve acts like bushing, prevents wobble.

$40.00 492135

Accuracy Sink screws consistently and precisely (to 1/256”) with mechanical and electronic depth control with automatic cut-off to prevent overdriven fasteners saving material as well as time in re-work to achieve quality results. Efficiency With motor speed of 4,500 RPM, coupled with the auto-feed magazine using collated screws, makes fast work of hanging sheets while the impulse-drive functionality provides exceptional battery life. Durability EC-TEC brushless motor technology, robust internal parts, and serviceable magazine, the DWC 18 is built for heavy-duty fastening work.

DWC 18 Drywall Gun

Hanging drywall is serious work and requires a serious drywall gun. Introducing the most refined and capable drywall gun yet – the DWC 18. Equipped with magazine attachment for using commonly available collated screws, on-demand push and drive system (no need to hold the trigger), electronic cut-off, precision depth control, user-serviceable magazine, and EC-TEC brushless motor, the DWC is built to make hard work less hard on you. Quiet, efficient, and accurate, for faster installs with less fatigue. Hang drywall faster, with less fatigue.

Warranty all-inclusive. 3-Year Wear-and-Tear Warranty on your Tool, Battery and Charger. Buy with confidence.

Strengths & Benefits

• Quiet, smooth, and tireless operation with EC-TEC Brushless Motor. • Increased battery life with on-demand operation. The motor only runs when the screw is driven. • Excellent depth control with precision micro-adjust. Detachable, user-serviceable magazine for problem-free operation.

DWC 18

Cordless DWC 18 Basic Belt clip; Bare tool without battery pack; Without charger; Depth stop; Magazine attachment; Magnetic bit holder; 2x bit PH 2 long; PH 2 bit; Scaffolding holder; SYS 2 T-LOC.

$349.00 201675

DWC 18 Accessories

Elongated Phillips driver bit for use with magazine attachment. Compatible with a majority of collated screws for drywall. PH bit PH 2-AF-55 3x DWC 18

$18.00 769124

Bit holder equipped with ¼” drive compatibility. For use with the depth stop cone. Bit Holder BH-DWC

$11.50 769125

Fine thread screws for fastening in metal studs and substructures. Collated strips. Available in 25 mm (1”) and 35 mm (1-3/8”) lengths. 1,000 per box. Drywall Screws

$34.00 769142

C FT 3.9x25 1000x

$34.00 769143

C FT 3.9x35 1000x

Drywall Screws

Coarse thread screws for fastening in wood studs and substructures. Collated strips. Available in 35 mm (1- 3/8”) and 45 mm (1-3/4”) lengths. 1,000 per box.

$34.00 769144

C CT 3.9x35 1000x

$34.00 769145

C CT 3.9x45 1000x

Magazine attachment (included with Basic and Plus sets)

Auto-feed magazine features tool-free removal, precision depth control, quick-release button for removing collated screw strips, and field strip capability for easy maintenance and long-life.

$210.00 202543

PSC/PSBC 420 CARVEX Jigsaws

Tackle your most demanding (and remote) applications with the robust and versatile new Carvex Cordless Jigsaws. Designed to deliver the same performance as their corded counterparts while taking advantage of the tool-less base change platform, these revolutionary jigsaws will have you forgetting that you’ve cut the cord. Increased cut performance with remarkable control.

Precise With automatic blade guidance,

stroboscopic lights, and zero-clearance Splinterguards, the Carvex lets you cut straight and true, with virtually zero tearout!

Versatile A revolutionary tool- less base change system delivers the most versatile, adaptable jigsaw cutting system you’ve ever experienced. Durable Brushless motors and a robust design ensure that the Carvex can handle not only your toughest materials, but the toughest conditions as well.

30 DAYS Risk-Free TRY IT!

Strengths & Benefits

• Effortlessly transition from corded to cordless without compromising performance. • Balanced with a unique ergonomic battery for optimum performance and handling. • Tackle your most demanding (and remote) applications with the robust and versatile Carvex Cordless Jigsaws. • Designed to deliver the same performance as their corded counterparts. • Tool-less base change platform.

PSC 420

Cordless Jigsaw CARVEX PSC 420 Basic Bare tool without battery pack; Without charger; 2x saw blade; Splinterguard; SYS3 M 187. Cordless Jigsaw CARVEX PSC 420 Set (2) BP 18 Li 4.0 HPC-ASI battery pack; Rapid charger TCL 6; 2x saw blade; Splinterguard; SYS3 M 187. Cordless Jigsaw CARVEX PSBC 420 Basic Bare tool without battery pack; Without charger; 2x saw blade; Splinterguard; SYS3 M 187. Cordless Jigsaw CARVEX PSBC 420 Set (2) BP 18 Li 4.0 HPC-ASI battery pack; Rapid charger TCL 6; 2x saw blade; Splinterguard; SYS3 M 187.

$349.00 576522

$499.00 576527

PSBC 420

$349.00 576531

$499.00 576535

CARVEX Jigsaw Accessories

Dimpled - Textured, low-friction base easily glides over wood and wood-like materials. Dimpled texture minimizes surface area and helps to prevent dust buildup in front of the saw. Base Hard Fiber - Smooth, durable base for reduced friction on wood and wood-like materials. Extremely durable construction for a long service life. Base

$27.00 497298

$27.50 497299

Steel insert for all metallic surfaces. Base

$25.00 497300

For use with StickFix base insert. Hook-and-loop design base facilitates quick and easy installation of felt covers to protect delicate surfaces from scratches and wear. Replacement Felt (5 pieces) Base Adapter (497 303) and Circle Cutter (497 304) for cutting circles from 2-11/16” (68 mm) to 9’ 10-1/8” (3 m). For best results, use with a scroll-type blade — S 75/4 K (486 563) or S 50/1.4 K (486 564). Circle Cutter Adapts to Guide Rails for guided cuts and also serves as base for use in circle cutting when attached to 497 304 listed below. For best results for guided cuts, use with FSG blades—S 75/4 FSG (499 476), S 105/4 FSG (499 477) or S 145/4 FSG (499 478). Guide Rail Base for CARVEX Jigsaw Metric - Expandable circle cutter attachment for use with Base Adapter (497 303). Expands from 2-11/16” (68 mm) to 9’ 10-1/8” (3 m). For best results, use with a scroll-type blade—S 75/4 K (486 563) or S 50/1.4 K (486 564). Circle Cutter StickFix hook-and-loop design base facilitates quick and easy installation of felt covers to protect delicate surfaces from scratches and wear. Base Universal base insert for wood and wood-like materials. Supplied with CARVEX Jigsaws. Base Imperial - Expandable circle cutter attachment for use with Base Adapter (497 303). Expands from 2-11/16” (68 mm) to 9’ 10-1/8” (3 m). For best results, use with a scroll-type blade—S 75/4 K (486 563) or S 50/1.4 K (486 564). Circle Cutter Tool-free, dual-angled base features stepless adjustment from +45° to -45°, for precise and simplified cutting on inside or outside edges. Angle Base Solid one-piece Splinterguard slides easily into place, for a custom fit with any blade, virtually eliminating tearout and time-consuming rework. Fits all Festool TRION and CARVEX Jigsaws. Splinter Guard

$26.00 497301

$20.00 497297

$14.00 497444

$75.00 497443

$29.00 497303

$55.00 497304

$55.00 201184

$125.00 496134

(20 pieces)

(5 pieces)

$11.50 490120

$28.00 490121

TSC 55 Track Saw

The new TSC 55 Cordless Track Saw builds on years of system innovation to deliver the most versatile, precise cutting system available, allowing you to go wherever the work takes you. The TSC 55 can zip through 100 meters of sheet goods on a single charge, while still delivering all the benefits you’ve come to expect from the Festool Track Saw System. The solution for producing straight, repeatable cuts.

Portability Stop stressing about running power cords. This cordless track saw lets you work where you need to work -- regardless of where the outlets are.

Straight Cuts Get incredibly straight and accurate cuts each time with the FS Guide Rail System.

No Tearout Splinterguards on both sides of the blade will ensure that you get a tearout-free cut.

Warranty all-inclusive. 3-Year Wear-and-Tear Warranty on your Tool, Battery and Charger. Buy with confidence.

Strengths & Benefits

• With the FS Guide Rail System, you’ll get laser-straight, splinter-free cuts in seconds. • Splinterguards on both sides of the blade ensure that you’ll make zero-tearout cuts in virtually any material. • Not only can you replace large stationary equipment with the incredibly precise, handheld track saw system, but now you can go wherever work needs to get done, without the cord.

TSC 55

Cordless TSC 55 Basic Bare tool without battery pack;

Without charger; Fine tooth saw blade HW W48; Splinterguard; Sight window; Chip collection bag; SYS 5 TL.

$499.00 201394

Cordless TSC 55 Set (2) BP 18 5.2 ASI battery pack; Rapid charger SCA 8; Fine tooth saw blade HW W48; Splinterguard; Sight window; Chip collection bag; SYS 5 TL. Cordless TSC 55 Set + Rail (2) BP 18 5.2 ASI battery pack; Rapid charger SCA 8; Fine tooth saw blade HW W48; Splinterguard; Sight window; Chip collection bag; FS 1400 guide rail; SYS 5 TL.

$699.00 576816

$799.00 576817

TSC 55 Accessories

TS 55 REQ Flush-mount Splinterguard protects material surface for both straight and bevel cuts. Splinter guard (5 pieces)

$25.00 499011

Set stop points on the Guide Rail for repeat cuts and plunge-cuts. Infinitely adjustable placement along the entire rail. Reduces the risk of kickback when initiating plunge-cuts. Limit Stop

$15.00 491582

Parallel Side Fence

Create parallel cuts from an edge. Can be used on both sides of the saw. Flip it over and it becomes an extension table. Rip capacity from the blade side to 11-13/16” (300 mm) and on the motor side to 3-3/4” (95 mm). Encloses blade housing for improved dust extraction when cutting vertically or overhead. Can also be used for creating architectural false joints. Cover Plate

$71.00 491469

$70.00 491750

Keep the work space clean by collecting virtually all dust. When not in use bag folds down for space-saving transportation and storage. Includes a dust cap. Dust Bag

$45.00 500393

Guide Rails

$92.00 491499 $110.00 491504 $145.00 491498 $225.00 491503 $355.00 491937 $385.00 491501 $665.00 491500 $145.00 496939 $365.00 491622

FS 800/2

32” (800 mm)

FS 1080/2

42” (1,080 mm)

FS 1400/2

55” (1,400 mm)

FS 1900/2

75” (1,900 mm)

FS 2700/2

106” (2,700 mm)

FS 3000/2

118”(3,000 mm)

FS 5000/2

197” (5,000 mm)

FS 1400/2-LR 32

55” for hole series (1,400 mm)

FS 2424/2-LR 32

95” for hole series (2,424 mm)

Metric dimensions binding.

Versatility Cross-cutting with ease or ripping materials to size, HKC saws are adept at all circular saw tasks while bringing a higher degree of efficiency, repeatability, accuracy, and quality of cut unlike any other circular saw before. Repeatability When used with FSK Guide Rails with integrated angle stops, making accurate, repeated, cuts are not only easy-it is also fast thanks to the integrated retraction feature.

Efficiency Perform practically all jobsite cutting tasks with one tool. Making repeated cuts is faster than other

methods while also providing accuracy in one step.

HKC 55 Carpentry Saw

Making exact and repeated cuts quickly and accurately anywhere without taking materials to a miter saw or sacrificing accuracy with a standard circular saw, makes this the ultimate solution for all wood processing on the jobsite. Coupled with FSK Guide Rails with integrated angle stops, HKC saws bring a higher degree of efficiency, repeatability, accuracy, and quality of cut unlike any circular saw before. Also compatible with all existing FS Guide Rails. The ultimate solution for all wood processing on the jobsite.

30 DAYS Risk-Free TRY IT!

Strengths & Benefits

• Making exact and repeated cuts quickly and accurately anywhere without taking materials to a miter saw. • The HKC is the ultimate solution for all wood processing on the jobsite. • Coupled with FSK Guide Rails with integrated angle stops, HK saws bring a higher degree of efficiency, repeatability, accuracy, and quality of cut unlike any circular saw before.

HKC 55

Cordless HKC 55 Basic Bare tool without battery pack; Without charger; HW standard saw blade W18; SYS 4 TL. Cordless HKC 55 Set (2) BP 18 5.2 ASI battery pack; Rapid charger TCL 6; HW standard saw blade W18; SYS 4 TL. Cordless HKC 55 Set + FSK Rail (2) BP 18 5.2 ASI battery pack; Rapid charger TCL 6; HW standard saw blade W18; FSK 250 guide rail; SYS 4 TL.

$399.00 201359

$599.00 576818

$699.00 576819

HKC 55 Accessories

PA-HKC 55 Create parallel cuts from an edge. Can be used on both sides of the saw. Flip it over and it becomes an extension table. Parallel Side Fence 160x1,8x20 W32 Keep the work space clean by collecting virtually all dust. When not in use, bag folds down for space-saving transportation and storage. Includes a dust cap. Dust Bag Easily and safely transport FSK Guide Rails. Equipped with shoulder strap. Available for the FSK 420 and FSK 670 rails. Bag

$65.00 500464

$45.00 500393

$69.00 200160 $86.00 200161

FSK420-BAG

FSK670-BAG

HK/HKC Carpentry Saws are fully compatible with the existing line of FS Guide Rails. Use FS Guide Rails for plunge cuts, longer cross-cuts, and longer rips that exceed the capacity of the FSK rails. Guide Rail FS

Various Lengths 32” - 197”

See TSC 55 Accessories for more details.

FSK Guide Rails When paired with the HK/HKC Carpentry Saws you will get straight and quick cross-cuts

every time. These guide rails feature integrated adjustable angle stops

along with a self-retraction feature. The new guide rails work only with the HK/HKC Carpentry Saws.

FSK Guide Rails

Guide Rail FSK FSK 250

$160.00 769941

9.8” (250 mm) Cross-cut capacity.

Guide Rail FSK FSK 420

$185.00 769942

16.5” (420 mm) Cross-cut capacity.

Guide Rail FSK FSK 670

$210.00 769943

26.3” (670 mm) Cross-cut capacity.

OSC 18 Oscillating Multi-Tool

Outstanding Results The exceptional control of the cordless VECTURO — provided by its accessory bases, depth control, and high-quality tooling — allow you to easily, precisely, and cordlessly make the perfect cut wherever you need it. Efficiency With its cordless operation, StarlockMax® integration, and dust extraction, the cordless VECTURO helps you do more work in less time. Ergonomics Regardless of where you use it, the OSC 18 is a comfortable tool to hold and handle thanks to its well-balanced design, low-vibration, and high durability.

The ultimate in versatility, the cordless VECTURO oscillating multi-tool combines limitless functionality with exceptional controllability — delivering precise results in the trickiest of places. With tool-less Plunge Base and Depth-Stop (sold separately or included with the VECTURO Set), the VECTURO oscillating multi-tool stands apart, delivering unbelievable control and precision. The StarlockMax® tool holder makes it possible to change tools quickly without the need for additional equipment. Additionally, the brushless EC-TEC motor with vibration isolation ensures that work can progress at an ultra-rapid pace at the same consistently high level of comfort. Versatile and limitless functionality for the trickiest of places.

30 DAYS Risk-Free TRY IT!

Strengths & Benefits

• Complete cordless mobility thanks to the 18V lithium-ion battery pack • Optional system accessories make it possible to create precisely guided plunge cuts and saw with minimal dust generation – even when working overhead • Noise and vibration damping for optimum comfort while working. The anti-vibration system ensures that the housing and motor are completely isolated • Brushless EC-TEC motor with variable speed control enables work to progress as quickly as possible • The keyless quick-change system with StarlockMax® tool holder enables tools to be changed quickly without the need for additional equipment.

OSC 18

Cordless OSC 18 Basic Bare tool without battery pack; Without charger; USB 78/32/Bi/OSC universal saw blade; SYS3 M 187.

$375.00 576589

Cordless OSC 18 Basic + Attachments

Bare tool without battery pack; Without charger; OSC-A Adapter; OSC-AH Position Aid; OSC-AV Dust Extraction Device; OSC-TA Depth Stop; USB 78/32/Bi/OSC universal saw blade; USB 50/35/Bi/ OSC universal saw blade; HSB 100/Bi/OSC wood saw blade; SYS3 M 187.

$599.00 576588

Cordless OSC 18 Set + Attachments

(2) BP 18 Li 4.0 HPC-ASI battery pack; Rapid charger TCL 6; OSC-A Adapter; OSC-AH Position Aid; OSC-AV Dust Extraction Device; OSC-TA Depth Stop; USB 78/32/Bi/OSC universal saw blade; USB 50/35/Bi/OSC universal saw blade; HSB 100/Bi/OSC wood saw blade; SYS3 M 187.

$799.00 576590

OSC 18 Accessories

Equipped with a depth stop for defined plunge cuts and an extractor connector for removing dust when sawing; can be used with offset saw blades. Plunge Base Enables plunge cuts with a defined depth; includes an adapter for fitting accessories without tools; working angle can be flexibly adjusted; contains two inserts: A rotating depth stop for plunge cuts and a sliding shoe for long, straight cuts. Depth Stop Set Provides an optimal view of the workpiece; makes it possible to saw with minimal dust generation; machine can be safely guided with both hands. Dust Extraction Device

$150.00 203254

$75.00 203255

$75.00 203256

Position Aid / Depth Stop / Dust Extraction Device Set

OSC-AH Positioning Aid; OSC-TA Depth Stop; OSC-AV Dust Extraction Device; OSC-A Adapter.

$250.00 203258

Price

Item # 203333

Qty

OSC 18 Blades

$85.00

5

HSB 50/35/J/OSC/5 1-3/8” (35 mm) x 2” (50 mm)

203332

$90.00

5

HSB 50/65/J/OSC/5 2-1/2” (65 mm) x 2” (50 mm)

$85.00

1

203334

HSB 100/Bi/OSC 100 mm

203337

$85.00

5

USB 78/32/Bi/OSC/5 32 mm x 78 mm

203338

$85.00

5

USB 78/35/Bi/OSC/5 35 mm x 50 mm

203336

$89.00

5

USB 78/42/Bi/OSC/5 42 mm x 78 mm

203960

$90.00

5

USB 50/65/Bi/OSC/5 65 mm x 50 mm

$75.00

1

204410

SSB 32/OSC

204414

$110.00

1

SSB 90/OSC/DIA 90 mm

SSP 52/OSC 204412

204412

$28.00

1

Durability Featuring a brushless motor that is enclosed for dust resistance, the AGC 18 is built for the toughest projects and backed with a 3-year wear-and-tear warranty. Versatility Equipped for surface grinding and including a unique battery position for cut-off operation, this angle grinder can help you tackle a wide array of professional projects.

Simplicity Save time with this easy to use tool that includes a keyless arbor, variable speed control, and tool- free guard change and positioning

AGC 18 Angle Grinder

Built for the professional remodeler.

The powerful AGC 18 cordless angle grinder is highly durable and built for the professional remodeler who needs reliable, versatile performance. With its enclosed brushless motor, protected electronics, and variable speed, the AGC 18 is built to last and perform in a broad variety of applications. This powerful grinder is extremely simple to use — with a keyless arbor and guard change, variable speed, and a unique battery position for cut-off operation.

Strengths & Benefits

• Work appropriately for the material: Speed can be steplessly adjusted between 4500 and 8500 rpm. • Ideal ergonomics for cutting work: Its design means that it fits well in the user’s hand, runs smoothly and generates few vibrations. • Systems get it done: Compatible with the battery packs and chargers in the Festool 18 Volt System. • Get results fast: Thanks to the powerful, brushless – and therefore maintenance-free – EC-TEC motor. • Soft start-up, electronic overload protection, motor brake and restart protection. • Robust and long-lasting: Enclosed motor and cast electronics are safely protected against dust.

AGC 18

Cordless AGC 18 Basic Bare tool without battery pack;

Without charger; Auxiliary handle; Flange; Keyless Flange Nut; Protective Cover; Key; SYS 2 T-LOC.

$375.00 575349

Cordless AGC 18 Set

(2) BP 18 5.2 ASI battery pack; Rapid charger TCL 6; Auxiliary handle; Flange; Keyless Flange Nut; Protective Cover; Key; SYS 2 T-LOC.

$625.00 575348

Warranty all-inclusive. 3-Year Wear-and-Tear Warranty on your Tool, Battery and Charger. Buy with confidence.

AGC 18 Accessories

Separating Protective Cover

For safe work with cutting discs made of bonded abrasives.

$50.00 203377

Protective Cover

For grinding work with flap discs and roughing discs.

$15.00 203383

Cut-off Wheel

For cutting steel and stainless steel. Dia. 4-1/2” (115mm), Max. hole dia. 7/8” (22.23mm), Qty: 10

$40.00 204903

Keyless Flange Nut

Front clamping flange; sanders clamped without using tools.

$30.00 204928

Flange Rear clamping flange; for clamping sanders.

$15.00 203382

Key For flange.

$20.00 204929

Hand Protection For safe work with wire brushes.

$15.00 205193

Auxiliary Handle VIBRASTOP Holder M8

$15.00 769620

Stay connected with Festool.

Festool TV A video channel dedicated to product and application content, helping you get the most out of your investment . Start here for instructional videos: www.festool.tv

Instagram Get inspiration, how-tos, and more from your fellow tradesmen in the Instagram community.

Share photos and views of your work using #festoolusa instagram.com/festool_usa

Facebook Connect with us to get the latest in product news and applications, or to see how others are using their tools.

Start here for the latest news www.facebook.com/festoolusa

Festool USA Use our main website as a launching pad to learn all there is to know about the Festool System.

festoolusa.com

Festool USA, LLC 400 N. Enterprise Blvd. Lebanon, IN 46052

Festool Cordless Catalog 2020 5720 0131 EN Festool is not responsible for typographical errors. Printed in the USA

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48

www.festoolusa.com

Made with FlippingBook - Online catalogs