Spindles
Product Code
MTD (see also Cub Cadet)
82-501
SC2652-4420
5/8-18 UNF THREAD
Replaces 717-0900
.735 [18.67mm] 48-TOOTH SPLINE
917-0900A
Description
• For 36", 38" & 39" cut tractors (1991–1997) • Shaft length 5-7/16" • Use with Oregon® 45-259 bearings
5.375 [136.53mm]
1.812 [46.04mm]
.990 [25.15mm] 48-TOOTH SPLINE
82-502
SC4609-7682
5/8-18 UNF THREAD
Replaces 717-0912
.735 [18.67mm] 48-TOOTH SPLINE
917-0912
Description
4.812 [122.24mm]
• For 44" cut, outer spindle, 46" cut, center & right-hand spindle on 800 to 849 series H, deep deck (1988-1992) • Shaft length: 4-15/16" • Use with Oregon 45-259 bearing
2.250 [57.15mm]
.990 [25.15mm] 48-TOOTH SPLINE
45-135
BK310-517
Replaces
15296A
Description
• Open bearing cup for deck spindles • Fits Oregon 82-500, 82-502, & 82-503
82-503
SC4048-6747
5/8-18UNF THREAD
Replaces 717-0913
917-0913
Ø.735[18.67mm] 48-TOOTHSPLINE
Description
• For 44" cut, center double pulley & 46" cut, left-hand spindle • Fits 800-849 series H (1988-1992) • Shaft length 6-5/16" • Use with Oregon 45-259 bearings
6.375[161.93mm]
S
2.250[57.15mm]
Ø.990[25.15mm] 48-TOOTHSPLINE
45-135
BK310-517
Replaces
15296A
Description
• Open bearing cup for deck spindles • Fits Oregon 82-500, 82-502, & 82-503
LG 915
Spindles
IMPORTANT: When installing spindles, follow all installation and maintenance instructions provided in the mowers owner/maintenance manual—in- cluding the correct torquing of the blade and pulley bolts/nuts as well as the lubrication of the spindle. Failure to do so may cause premature failure.
Made with FlippingBook - professional solution for displaying marketing and sales documents online