Guide Bars
How the Oregon® Guide Bar Part Numbering System Works
Oregon guide bar part numbers are printed on the bar package and etched on the bar body. Here’s what each digit means:
PowerCut ™
3
18 0 EXL D K095
Sprocket Nose Codes Pitch
Professional Guide Bar Codes
Length (in.)
Gauge (in.)
Tooth Count
Bar Mounts
A 041 A061 A074 A089 A095 A218 A318 D009 D024 D025 D033 D096 D176 D196 E031 K041 K095 K216 Z095
SpeedCut ™ Nano
A = 1/4" B = 325" D = 3/8" E = 3/8" F = 404" G = 325" H = 3/8" N = 325
10 10 or 12 9 or 11 7 or 9
8 10 11 12 13 14 15 16 18 20 21 22 24 25 26 27 28 30 32 33 34 36 37 42
4 = 043" 0 = 050" 8 = 058" 3 = 063"
TXL = SpeedCut Nano
10 12 11
SpeedCut ™ TXL = SpeedCut
VersaCut ™
Solid Nose Code
M Medium (1.33")
VXL = VersaCut
ControlCut ™ PXL = ControlCut
PowerCut ™ EXL = Replaceable sprocket-nose RN = Replaceable sprocket-nose PM = Replaceable sprocket-nose RW = Replaceable sprocket-nose DuraCut ™
Intenz® T041 T095 T218 T318
DXL = Solid nose, laser welded tip with wear-resistant alloy AT = Solid nose, laser welded tip with wear-resistant alloy Occasional User Bar Codes AdvanceCut ™
SX = Sprocket-nose PX = Sprocket-nose GD = Sprocket-nose with Guard Mate holes ML = Narrow kerf sprocket-nose SF = Sprocket-nose Single Rivet SD = Sprocket-nose DG = Sprocket-nose with Guard Mate holes ML = Narrow kerf sprocket-nose
Comments: •
In a few cases, where two bars would have the same length in their part numbers but different drive link counts, the letter Z will be used in the bar mount description to distinguish between them (K095 and Z095 for example). • Chainsaws originally equipped with an Intenz® bar, and saws adapted to take an Intenz® bar, do not have a “bar adjustment pin” for tensioning the chain. Use ONLY an Intenz bar when replacing the guide bar on these saws. See page FOR for important information on Intenz bars. • PowerCut solid body bars may be stamped with XXX, ZZZ or other letters as they can have different noses installed on the body, thereby changing the part number.
• Guard Mate holes are built into the noses of certain types of Oregon bars and allow the attachment of a Guard Mate tip guard to help reduce the risk of kickback. • Oregon Sculptor™ carving bar part numbers do not follow the Oregon bar part numbering system. • Bar types and part numbers printed in red italics have been obsoleted. Contact your authorized Oregon distributor for availability.
FOR 161
Guide Bars
Made with FlippingBook - professional solution for displaying marketing and sales documents online