39 DRAWBAR & TURNTABLE
OUT-OF-SERVICE CRITERIA
(For a complete listing of Out-of-Service Criteria, see 49 CFR 393)
• The turntable can have no more than 5/64” of play in the lateral direction and 1/8” of play in the vertical direction. • The drawbar hinges and eye cannot have more than manufacturer’s-
Check the turntable, hinges, and drawbar eye for wear proper torque values.
T
TURNTABLE
TURNTABLE FASTENERS MUST BE KEPT TIGHT. Use properly torqued 5/8” diameter, Grade-8 bolts and nuts with hardened washers. Contact the Beall factory of origin
T
for the correct replacement fasteners. Do not reuse fasteners once removed.
www.
.com
Made with FlippingBook Annual report maker