SolarEdge Energy Bank 10kWh Battery For Europe
BAT-10K1PS0B-01
OUTPUT Total Energy
10300 9700 5000 7500 >94.5
Wh Wh
Usable Energy (100% depth of discharge)
Continuous Output Power
W W %
Peak Output Power in Backup (for 10 seconds)
Peak Roundtrip Efficiency
Warranty (1)
10
years
Voltage Range
350-450
Vdc
ADDITIONAL FEATURES Compatible Inverters
StorEdge Single Phase Inverter with HD-Wave Technology, Single Phase Inverter with HD-Wave Technology ( 2)
Battery p er Inverter
Up to 3 (3) Wireless*
Communication Interfaces
STANDARD COMPLIANCE Certification Cell
IEC 62619
Battery
IEC 62619, UN38.3
Emissions
IEC61000-6-1, IEC61000-6-2, IEC61000-6-3
INSTALLATION SPECIFICATIONS Dimensions (W x H x D)
790 x 1179 x 250
mm
Weight
121
kg
Mounting
Floor (4) or wall mount (5)
Operating Temperature
-10 to +50 -10 to +30 -30 to +60
°C °C °C
Storage Temperature (more than 3 months) Storage Temperature (less than 3 months)
Enclosure Protection Maximum Altitude
IP55 - indoor and outdoor
2000
m
Cooling
Natural convection
Noise at 1m Distance dBA * The SolarEdge Energy Bank is designed for use with SolarEdge Energy Net for wireless communication. The inverter might require a matching SolarEdge Energy Net Plug-in (more details below). Using RS485 could reduce the usable energy to 9500Wh . (1) For warranty details please refer to the SolarEdge Energy Bank battery Limited Warranty . (2) Requires supporting inverter firmware . (3) Requires supporting inverter firmware. Installations with multiple SolarEdge Energy Bank batteries require a pair of branch connectors (DC + and DC -) per battery excluding the last battery . (4) The floor stand is purchased separately. One floor stand is required per SolarEdge Energy Bank battery. Please refer to the Accessories' PN table below . (5) Wall mount installation requires handles that should be purchased separately. Please refer to the Accessories' PN table belo w. SolarEdge Energy Bank Battery – Accessories (purchased separately) Accessory PN Floor stand IAC-RBAT-FLRSTD-01 Handles IAC-RBAT-HANDLE-01 Branch connectors set (includes a pair of DC + and DC - connectors) Required for installations with multiple SolarEdge Energy Bank batteries with a single inverter IAC-RBAT-RWYCBL-01 <25
Hyper link to SolarEdge Energy Net Plug-in Data Sheet
SolarEdge Energy Net Plug-in
SolarEdge Energy Net Plug-ins Inverter Model
Matching SolarEdge Energy Net Plug-in PN
SolarEdge Energy Net-ready inverter with the following part number format: SE…-…BExx SE…-…BZxx SE…-…BXxx SE…-…BLxx For example: SE7K-AUBTEBEU4 SetApp-enabled inverter Note: Plugs into the cellular socket Cellular plug-in or ZigBee plug-in cannot be installed in parallel
ENET-xBNP-01
ENET-xBCL-01
SetApp-enabled LCD inverter **
ENET-xBRP-01
** A SolarEdge Energy Net ready Communication Board with LCD is needed .
© SolarEdge Technologies Ltd. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Ltd.Allothertrademarksmentionedhereinaretrademarks oftheirrespectiveowners. Date:07/2021 DS-000051-1. 4 -EU. Subject to change without notice.
Go Back
13
Made with FlippingBook - professional solution for displaying marketing and sales documents online