SolarEdge Home Hub Inverter Single Phase, for Europe SE2500H / SE3000H / SE3680H / SE4000H / SE5000H / SE6000H SE2500H SE3000H SE3680H SE4000H SE5000H SE6000H Units OUTPUT – AC ON GRID Rated AC Power 2500 3000 3680 4000 5000 6000 VA Maximum AC Power Output 2500 3000 3680 4000 5000 6000 VA AC Output Voltage (Nominal) 220 – 230 Vac AC Output Voltage (Range) 184 – 264.5 Vac AC Frequency Range (Nominal) 50 ± 5 Hz Maximum Continuous Output Current RMS 11.5 14.0 16.0 18.5 23.0 27.5 A Total Harmonic Distortion (THD) < 3 % Power Factor 1, adjustable -0.4 to 0.4 Utility Monitoring, Islanding Protection, Country Configurable Thresholds Yes Charge Battery from AC (if allowed) Yes OUTPUT – AC BACKUP Rated AC Power in Backup Operation 5400 W AC Output Voltage (Nominal) 220 – 230 Vac AC Output Voltage (Range) 184 – 264.5 Vac AC Frequency 50/60 ± 5 Hz Maximum Continuous Output Current in Backup Operation 25.0 A INPUT – DC (PV AND BATTERY) Transformer-less, Ungrounded Yes Maximum Input Voltage 480 Vdc Nominal DC Input Voltage 380 Vdc Ground-Fault Isolation Detection 600kΩ Sensitivity per Unit Maximum DC PV Power 5000 6000 7360 8000 10000 12000 W Maximum Input Current 7.0 9.0 10.5 11.5 13.5 16.5 Adc Isc PV 7.0 9.0 10.5 11.5 13.5 16.5 Adc Maximum Inverter Efficiency 99.2 % European Weighted Efficiency 98.3 98.8 99 % Reverse-Polarity Protection Yes
BATTERY STORAGE Supported Battery Models Number of Batteries per Inverter
SolarEdge Home Battery 400V
Up to 3
5000W per battery, total continuous discharge power is limited up to the inverter rated AC power for on-grid and backup applications
Continuous Power
W
SMART ENERGY CAPABILITIES Backup and Battery Storage ADDITIONAL FEATURES Supported Communication Interfaces Integrated AC, DC and Communication Connection Unit STANDARD COMPLIANCE (1) Safety Inverter Commissioning
With Backup Interface (purchased separately) for service up to 100A; up to 3 inverters
RS485, Ethernet, Wi-Fi (optional), SolarEdge Home Network
Built-in
Inverter Commissioning with the SetApp mobile application using built-in Wi-Fi Access Point for local connection
IEC-62109
VDE-AR-N 4105, Tor Erzeuger Typ A, EN50549-1, CEI 0-21, G98 Type A, G98 NI Type A, RD1699 / RD413 / NTS, VDE-V 0126-1-1, VFR 2019, C10/11, EN50438 IEC61000-6-2, IEC61000-6-3, IEC61000-3-11, IEC61000-3-12, EN55011
Grid Connection Standards
Electromagnetic Compatibility (EMC) INSTALLATION SPECIFICATIONS AC Output – Supported Cable Diameter AC – Supported Wire Cross Section Dimensions with Connection Unit (H x W x D)
9 – 16 1 – 13
mm mm 2 mm
450 x 370 x 174
DC Input Weight Cooling
2 x MC4 pairs for PV input; 1 x MC4 pair for battery input
12
kg
Natural convection
Noise
< 25
dBA
Operating Temperature Range
-40 to +60
ºC
Protection Rating
IP65 – outdoor and indoor
(1) For details about the inverters approved for installation in your country, see here.
solaredge.com
Go Back
25
Made with FlippingBook - professional solution for displaying marketing and sales documents online