12 PRE-TRIP INSPECTION
DRIVER’S VEHICLE INSPECTION REPORTS At minimum, the following items must be checked while performing the post- trip and pre-trip inspections. Review the last driver vehicle inspection report to verify action items are resolved. It is imperative that the operator be satisfied the items listed below are in safe operational condition. It is also up to the operator to make sure that all compliance related items are satisfied. Vehicle safety check should be performed daily prior to operation. PERIMETER OF TRAILER 1. Air and electrical lines: Look for signs of leakage or abrasion. 2. Glad hands: Make sure they are clean and positively seal when charged. 3. Coupler/drawbar eye: Check for loose fasteners, wear, and then consult the manufacture’s information if needed. 4. Drawbar hinges: Check for loose fasteners, wear, and then consult the manufacture’s information if needed. 5. Tires: Look closely for visible damage and uneven tread wear. Make sure that all tires are inflated to the proper pressure. Consult a tire professional for specific problems. 6. Rims/wheel nuts: Check for cracks, rust, or damage to rims. Look for loose, missing, or corroded fasteners. 7. Lights and reflectors: Make sure all reflectors and lights are in place, visible, and that all lighting devices are working properly. Clean or clear as required. 8. Warning labels/signage: Make sure they are in place and legible. Use the proper signage for product being transported. 9. Clean or replace all safety decals if they cannot be read. 10. Verify that all accessories are secure such as tarps, doors, safety items, etc.
Made with FlippingBook Annual report maker