PRE-TRIP INSPECTION
13
UNDERCARRIAGE 1. Spring suspension: Look for cracked or broken springs and loose fasteners. 2. Air-ride suspension: Look for frayed or leaking air springs and loose fasteners. 3. Air-brake system: Inspect the brake system for proper adjustment, leaks, broken, missing, or worn components. 4. Fasteners: Look for signs of movement at fasteners and replace any that are missing. 5. King pin/turntable: Check for proper lubrication, loose fasteners, wear, and then consult the manufacture’s information if needed. 6. Landing gear: Make certain that all bracing and fasteners are in tact, secure and that the gear is operational. OVERALL 1. Check to make sure all your emergency equipment is in place and secure. 2. Check the entire trailer and components for any signs of fluid or air leakage. 3. Look for signs of movement at fasteners and replace any that are missing. For more information, review the Code of Federal Regulations (www.gpo.gov) or visit any of the compliance-related web-sites on the internet. The operator should also check local and state regulations for compliance. This information should compliment your Company inspection requirements and those mandated by your loading and unloading facilities.
A vehicle safety check should be performed daily prior to operation.
NOTICE
Make sure all safety decals are legible. If not, clean or replace them as needed. Make sure Conspicuity is well maintained and clean for maximum performance
NOTICE
NOTICE
Conspicuity should be maintained as originally installed.
www. MACTrailer .com
Made with FlippingBook Annual report maker