24 SAFE COUPLING PROCEDURE
2.1.1 LANDING GEAR Your Bullet trailer is/could be equipped with either a set of landing gear, stiff leg, drop tube, or a drawbar jack depending on the trailer’s configuration. This equipment is there to assist the operator in coupling and uncoupling their trailer and to hold the trailer or drawbar up while not in use. 1. Semi trailers with 2 speed crank style gear. a. Raising the landing gear. • Remove the crank handle from its transport position.
• Using low gear, raise the landing gear until the pads come off of the ground.
• Switch to high gear, fully retract landing gear and secure the handle in its transport position.
b. To lower the landing gear, reverse the steps shown for raising the landing gear.
Made with FlippingBook Annual report maker