DRAWBAR & TURNTABLE
31
OUT-OF-SERVICE CRITERIA
(For a complete listing of Out-of-Service Criteria, see 49 CFR 393)
• The turntable can have no more than 5/64” of play in the lateral direction and 1/8” of play in the vertical direction. • The connecting hinges cannot have more than factory-specified tolerances. • The drawbar eye cannot be worn more than factory-specified tolerances.
Properly check the turntable, hinges, and drawbar eye for wear according to the manufacturer’s specifications.
TURNTABLE
TURNTABLE FASTENERS MUST BE KEPT TIGHT. Use properly torqued 5/8” diameter, Grade-8 bolts and nuts with hardened washers. Contact the Bullet trailer factory of origin for the correct replacement fasteners. Do not reuse fasteners once removed.
T
www. MACTrailer .com
Made with FlippingBook Annual report maker