GENERAL MAINTENANCE
73
MFG. BY ShirAul, LLC
PERIODIC DOT INSPECTION FMCSA Certification: When new this vehicle passed an inspection in accordance with 49 CFR, part 396 and shall be re-inspected during or before the same calendar month on year after the date marked on the certification sticker. Information on the content of the inspection report must be retained by the motor carrier.
CERTIFICATION THIS VEHICLE HAS PASSED AN INSPECTION IN ACCORDANCE WITH 49 CFR, PART 396 AND SHALL BE REINSPECTED DURING OR BEFORE SAME CALENDAR MONTH ONE YEAR AFTER THE DATE SHOWN BELOW. INFORMATION ON THE CONTENT OF THE INSPECTION REPORT CAN BE OBTAINED BY CONTACTING THIS MOTOR CARRIER. 410 FACTORY ROAD • SUNNYSIDE, WA 98944 FMCSA PERIODIC INSPECTION JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC 13 14 15 16 17 18
COMPRESSOR
B001
Recommended compressor governor cut-in pressure must be 105 psi for trailers and chassis manufactured after October 8, 1992 to release parking brakes properly.
ELECTRICAL The wiring harness system is designed specifically for this model. Always follow sound electrical wiring and testing procedures when inspecting, testing, or maintaining the wiring harness, lights, and accessories.
Keep all wiring properly maintained.
1. Lubricate connections with dielectric grease. 2. Lubricate 7-way and other plug connections with dielectric grease. 3. Do not probe wires through the insulation, test at wire ends. 4. Keep all connections within a protective junction box. 5. ABS sensor wires must be inspected and maintained for proper operation. 6. Overfill Protection wiring including probe wiring is very small and care must be taken when maintaining these connections. 7. Work lights and misc electrical accessories need to be maintained and the wiring protected. 8. Replace any exposed wire and inspect high traffic areas such as working cabinets that may contain electrical components and wiring. 9. Protect all wiring harnesses and wiring in conduit when using a drill, saw, heat, or performing weld repairs.
www. MACTrailer .com
Made with FlippingBook Annual report maker