5. Place the application tape with the cut-out pieces on top of your shirt, the application tape will be on top
6. Wipe it firmly to your shirt with your hands. Press for 160°c and 3 seconds.
7. Open the press and wipe firmly over the application tape with a cloth until it is cooled down completely.
8. Slowly and carefully, remove the application tape (some of the print will transfer to the application tape, but it DOES NOT affect the quality of the print or the colour)
9. Place a Silicone sheet over the print and press for 160°c and 20 seconds.
PLEASE NOTE:
• When using a temperature over 160°c (290 on an old 4in1 press) will damage the glue layer and cause the print to fall off the shirt. • The use of refill inks can result in premature fading or even running due to the low quality of some ink refills • For best result: After applying the application tape, gently rub it using firm pressure with a scraper or cloth so it adheres evenly to the print without bubbles. Turn the page over and rub from the back as well and then peel the plastic backing from the application tape and print. • Washing Instructions: Wash INSIDE OUT in cold water and do not tumble dry
Made with FlippingBook - professional solution for displaying marketing and sales documents online