Barnes Fencing Industries (Pty) Ltd is a principal manufacturer of steel products, including wire and fencing for construction, mining, agriculture and hardware industries. Contact Mark for more info 060 985 1870
TABLE OF CONTENTS
INTRODUCTION
01 - 02
GALVANISED WIRE
03 - 04
BARBED WIRE
05 - 06
DIAMOND MESH
07 - 08
WELDED MESH
09 - 10
CONSTRUCTION
11 - 12
NETTING WIRE
13 - 14
FIELD FENCE
15 - 16
HARD DRAWN AND RIBBED WIRE
17 - 18
POSTS, STAYS AND GATES
19 - 21
OTHER PRODUCTS
22
ABOUT US
Barnes Fencing Industries (Pty) Ltd is a principal manufacturer of steel products, including wire and fencing for construction, mining, agriculture and hardware industries. Established in 1993, this multifaceted producer boasts a large network of clients in South Africa and abroad. Barnes Fencing Industries prides itself for possessing diverse, talented and passionate employees, from the front desk to the warehouse. On a monthly basis, Barnes Fencing Industries produces about 6000 tons of galvanised wire and products. As a result of its resources and expertise, the company has been able to manufacture quality fencing, wire and a wide range of steel products for the industry at large.
FENCING INDUSTRIES (PTY) LTD
02
GALVANISED WIRE
GALVANISED WIRE
Galvanised wire are supplied in rosette-pattern laid jumbo coils of which the coil weight could range between 300kg to 900kg.
AVERAGE COIL GEOMETRY (900kg COIL)
COIL HEIGHT (mm)
COIL OUTSIDE DIAMETER (mm)
COIL INSIDE DIAMETER (mm)
850
760
450
WIRE DIAMETER RANGE
MINIMUM WIRE DIAMETER (mm)
MAXIMUM WIRE DIAMETER (mm)
1.25mm ± 0.05
5.60 ± 0.10
TENSILE STRENGTH RANGES
Low Tensile
360MPa - 575MPa 600MPa - 900MPa 950MPa Minimum 1350MPa Minimum
Medium Tensile
High Tensile
Ultra-High Tensile
ZINC COATING RANGES SANS 10244 Class A - Heavy Galvanised SANS 10244 Class D - Lightly Galvanised
*Extra Heavy Galvanised - 366g/m 2
*See back page for extract SANS 10244. *Extra Heavy Galvanised offered upon request.
SPLIT AND TIED COILS
For ease of handling, a wide varierty of wire products are split into 50kg, 5kg, 2kg or 500g coils.
HIGH STRAIN FENCING WIRE
ZINC COATING (g / m 2 Min)
NOMINAL ROLL LENGTH (m)
COIL WEIGHT (kg)
WIRE DIAMETER (mm)
BREAK STRENGTH (kN) Min
HEAVY GALVANISED
LIGHTLY GALVANISED
2.00 2.24
3.3 4.2 4.3
215 230 230
40 45 45
2100 1650 1500
50
2.00 x 2.60 Oval
SPECIALITY WIRE
Barnes Fencing Industries also produces the following speciality wire products upon request: • Cotton Bailing Wire • Cable Armouring Wire (SANS 1411 - 6) • Paper Pulp Unitizing Wire
04
BARBED WIRE
BARBED WIRE
ROLL LENGTH (m)
ROLL WEIGHT (kg)
BREAKING STRENGTH (kN)
ZINC COATING (Min)
LINE WIRE (mm)
BARBED WIRE (mm)
PRODUCT
2.24 2.90
1.70 1.70
845 515 845 515 290 845 515 540 380 270 108 540 380 270 800 540 270 150 800 540 500 380 270 160 845 540 270
35.0 35.0 28.0 17.0 10.0 18.0 15.0 50.0 35.0 25.0 10.0 40.0 24.0 18.0 50.0 34.0 17.0 10.0 39.0 31.0 30.0 18.0 15.0 8.10 35.0 24.0 12.0
4.2 6.9
SINGLE STRAND
SINGLE STRAND BABY
2.00
1.70
3.2
SINGLE STEEL LIGHT DUTY
1.57
1.47
2.0
2.50
1.70
4.9
SANS 10244-2:2011 Heavy Galvanised - Class A Lightly Galvanised - Class D
2.20
1.70
3.8
DOUBLE STRAND (IOWA)
2.00
1.80
3.1
1.70
1.60
2.3
REVERSE TWIST HIGH TENSILE
1.57
1.47
4.1
06
DIAMOND MESH
DIAMOND MESH (CHAIN LINKED FENCE)
Design your own combination by selecting one item per catagory: i.e. A=2.00mm / B=Heavy Galvanised / C=75mm / D=1200mm / E=30m *Note: PVC coating (Tennis court wire) is available upon request
1.80
2.00
2.20
2.50
3.15
A. Wire Diameter (mm)
Lightly Galvanised (SANS 10244 Class D)
Heavy Galvanised (SANS 10244 Class A)
B. Zinc Coating
50
65
75
90
C. Aperture Size (mm)
900
1200
1800
2400
3000
3600
4000
D. Roll Height (mm)
25
30
E. Roll Length (m)
08
WELDED MESH
WELDED MESH
INDUSTRIAL MESH
1.60
2.0
A. Wire Diameter (mm)
Lightly Galvanised (SANS 10244 Class D)
B. Zinc Coating
13 x 25
25 x 25
25 x 25
25 x 25
100 x 100
C. Aperture Size (mm) D. Roll Height (mm)
900
1200
1800
30
E. Roll Length (m)
FENCING MESH
2.50
3.15
A. Wire Diameter (mm)
Lightly Galvanised (SANS 10244 Class D)
B. Zinc Coating
50 x 25
50 x 50
75 x 75
100 x 50
100 x 100
C. Aperture Size (mm) D. Roll Height (mm)
900
1200
1800
2400
25
30
E. Roll Length (m)
MINING MESH (ROLLS)
3.15
A. Wire Diameter (mm)
None - Black Hard Drawn Wire
Lightly Galvanised (SANS 10244 Class D)
B. Zinc Coating
75 x 100
100 x 100
100 x 50
C. Aperture Size (mm) D. Roll Height (mm)
900
1200
2400
30
35
E. Roll Length (m)
MINING MESH (SHEETS)
3.15
4.00
5.60
or choose a combination of diameters “Combo”
A. Wire Diameter (mm)
3.15 x 5.60
3.15 x 4.00
4.00
Lightly Galvanised (SANS 10244 Class D)
Heavy Galvanised (SANS 10244 Class A)
Extra Heavy Galvanised (366g/m 2 Min)
B. Zinc Coating
75 x 100
75 x 75
100 x 100
100 x 150
C. Aperture Size (mm) D. Sheet Width (mm) E. Sheet Length (m)
900
1200
1500
1800
2400
1 to 6
10
CONSTRUCTION
CONSTRUCTION
FABRICATED REINFORCING MESH
888
747
617
500
395
311
245
193
100
MRM Reference Number
8.88 200 200
7.46 200 200
6.17 200 200
5.0
3.95 200 200
3.11 200 200
2.45 200 200
1.93 200 200
1.00 200 200
Kg / m 2
200 200
Main (mm) Cross (mm) Main (mm) Cross (mm)
Mesh Pitch
Wire Pitch
12
11
10
9.0
8.0
7.1
6.3
5.6
4.0
Wire Size
12
11
10
9.0
8.0
7.1
6.3
5.6
4.0
Cross Section Area Per Meter Width
566
475
393
318
251
198
156
123
63
REINFORCING BAR / SMOOTH BAR
Actual Wire Diameter (mm)
12.0 0.89 5.32
10.0 0.62 3.70
8.0
7.1
6.3
6.0
5.6
4.0
Diameter Kg / m Kg / 6m
0.39 2.37
0.31 1.86
0.24 1.47
0.22 1.33
0.19 1.16
0.10 0.59
SMOOTH BAR
REINFORCING BAR
SPECIALISED MESH (SHEETS)
3.15 or 4.00
A. Wire Diameter (mm)
None - Black Hard Drawn Wire
B. Zinc Coating C. Aperture Size
50 x 50
100 x 50
1200 2400
D. Sheet Width (mm) E. Sheet Length (mm)
BRICKFORCE
1.8 - 2.8
A. Wire Diameter B. Zinc Coating C. Aperture Size D. Sheet Length (m)
None - Black Hard Drawn Wire
Lightly Galvanised SANS 10244 Class D
75
110
150
230
15
20
12
NETTING WIRE
NETTING WIRE (HEXAGONAL MESH)
CONSTRUCTION
ZINC COATING
HEAVY GALVANISED 10244 CLASS A
LIGHTLY GALVANISED 10244 CLASS D
ROLL LENGTH
APERTURE (mm)
WIRE DIAMETER (mm)
5m 10m 50m
13
0.7
25
0.9
50
1.0
75
1.8
90
1.8
ROLL HEIGHT AVAILABLE (mm)
600
900
1200
1800
14
FIELD FENCE
FIELD FENCE
STANDARD
LINE WIRE
STAY / CROSS WIRE
EDGE WIRE
2.24
2.50
2.90
WIRE DIAMETER (mm) ZINC COATING (g / m 2 )
Heavy Galvanised 10244 Class A or Lightly Galvanised 10244 Class D
4.2
2.4
6.9
BREAKING STRENGTH (kN)
LIGHT DUTY
LINE WIRE
STAY / CROSS WIRE
EDGE WIRE
2.0
2.0
2.50
WIRE DIAMETER (mm) ZINC COATING (g / m 2 )
Lightly Galvanised 10244 Class D
3.3
1.5
5.1
BREAKING STRENGTH (kN)
*Available in 7 line and 10 line
HEIGHT (mm)
75 90 100
117
126
140
155
178
200
230
230
230
230
6 LINE WIRES 900mm HIGH (LIVESTOCK)
7 LINE WIRES 1130mm HIGH (LIVESTOCK)*
8 LINE WIRES 1150mm HIGH (LIVESTOCK)
9 LINE WIRES 980mm HIGH (LIVESTOCK)
10 LINE WIRES 1180mm HIGH (LIVESTOCK)*
13 LINE WIRES 1870mm HIGH (GAME / BOUNDARY)
14 LINE WIRES 2100mm HIGH (GAME / BOUNDARY)
16
HARD DRAWN AND RIBBED WIRE
HARD DRAWN AND RIBBED WIRE
Hard drawn wire of various chemical compositions are supplied in coils weighing approximately 300kg.
AVERAGE COIL GEOMETY (300kg COIL)
COIL HEIGHT (mm)
COIL OUTSIDE DIAMETER (mm)
COIL INSIDE DIAMETER (mm)
300 - 500
700
500
WIRE DIAMETER RANGE
MINIMUM WIRE DIAMETER (mm)
MAXIMUM WIRE DIAMETER (mm)
1.25 ± 0.02
5.60 ± 0.05
RIBBED WIRE
Ribbed wire are supplied in layer wound coils of which the coil weight varies between 500kg - 2000kg.
AVERAGE COIL GEOMETRY (1000kg COIL)
COIL HEIGHT (mm)
COIL OUTSIDE DIAMETER (mm)
COIL INSIDE DIAMETER (mm)
900
800
630
WIRE DIAMETER RANGE
MINIMUM WIRE DIAMETER (mm)
MAXIMUM WIRE DIAMETER (mm)
4.00 ± 0.05
12.0 ± 0.08
18
POSTS, STAYS AND GATES
POSTS, STAYS AND GATES
STANDARD POST
POST
WALL THICKNESS (mm)
LENGTH (mm)
FINISH
STAY
1800
1.60 / 2.00
2400
2.00 / 3.00
Painted or Galvanised
3000
2.00 / 3.00
3600
2.00 / 3.00
OVERHANG
SECURITY POST
SECURITY POST
*Security posts are made with a 400mm overhang.
WALL THICKNESS (mm)
LENGTH (mm)
FINISH
STAY
1800
1.60 / 2.00
Painted or Galvanised
2400
2.00 / 3.00
3000
2.00 / 3.00
20
POSTS, STAYS AND GATES
SECURITY
SECURITY
DOUBLE
PEDESTRIAN / SINGLE
HOMESTEAD
HOMESTEAD
DOUBLE
PEDESTRIAN
HEIGHT (mm)
WIDTH (mm)
900 3000 3600 900 3000
1800
SECURITY
1200
HOMESTEAD
1800
3600
HEIGHT (mm)
WIDTH (mm)
HEAVY DUTY / MEDIUM DUTY
900
1200
2400
FARM GATE Available in Light Duty / Heavy Duty
1200
3000
3600
4200
4800
SINGLE
OTHER PRODUCTS
BUILDING TRESTLES
PALISADES
RAZOR WIRE
FLAT WRAP
BARBED TAPE CONCERTINA
NEWCASTLE DROPPER
RIDGEBACK DROPPER
Y-STANDARD
K-STANDARD
SQUARE TUBING
LIP CHANNEL TUBING
ROUND TUBING
ROUND TUBING
22
Scaw Metals Group 3 Milner Street, Metro Township, Milner, Paarden Island + Directions
Mark Kroeger Tel: 060 985 1870 Email: capetown.barnes@barnesfencing.co.za
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24Made with FlippingBook - professional solution for displaying marketing and sales documents online