TREX® FASCIA COLOR-MATCH COMPOSITE SCREW Installation Instructions
IMPORTANT NOTES:
» Do NOT use for Trex Decking applications. » Not recommended for use in salt environments. » Always follow fascia board manufacturer’s installation guidelines for gapping and general installation recommendations. The Trex Hideaway® Fascia System works by allowing movement from the moisture cycling of the wood as well as the thermal movement from the wood-plastic composite or PVC fascia. The counterbore tool drills a hole that is slightly larger than the shank of the screw intentionally to allow for this. Do not over tighten screw.
PARTS & TOOLS NEEDED
1 3/4"
HEXSTIX® HS-20 Drive Bit
Color-match Fascia Counterbore tool (red)
Color-Match Fascia Screw
Installation Instructions:
1
3
• W hen using 2” x 10” or larger framing (1x12 fascia applications), bore 3 holes into the fascia every 18” ensuring that holes are starting and ending 1” away from
• U sing the Color-match
Fascia Counterbore tool (sold separately) in an 18V or higher cordless drill, counterbore holes into the fascia board to the proper depth by drilling until the cup stops spinning.
18"
1" x 12" Fascia (2" x 10" rim joist)
the ends of the fascia as well as 1” from the bottom and top of the rim joist.
2
4
• U sing the HEXSTIX® Drive Bit, install
• W hen using 2" x 8"
framing (in most cases 1x8 fascia is used for this application), bore two holes into the fascia every 18”, ensuring that holes are starting and ending 1” away from ends of the fascia as well as 1” from bottom and top of the rim joist.
18"
fasteners at a 90° angle (perpendicular to the fascia). Screws are designed to be installed
1" x 8" Fascia (2" x 8" rim joist)
flush with decking surface. DO NOT
countersink screws. DO NOT overdrive screws.
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
THR-0220 FCM-0323
Page 1Made with FlippingBook flipbook maker