TREX TRANSCEND ® Open-Joint Cladding Installation Instructions
WOOD FURRING STRIPS (Pressure-Treated Wood)
Minimum 1-1/2" x 1-1/2"
1-1/2" x 3-1/2" Used for butt joint applications
» Install furring strips at a maximum of 24" on center. » Use two approved fasteners for attaching cladding to furring strips. » Where cladding boards abutt, a 1-1/2" x 3-1/2" furring strip must be used.
24"
24"
24"
» Always ensure cladding boards are level or plumb for horizontal or vertical applications.
1-1/2" x 1-1/2" furring strip
1-1/2" x 3-1/2" furring strip
Install code-approved water-resistant barrier as required, before installing furring strips
Maintain a minimum of 6" of clearance o grade
6 "
3/16" min gap all temps
See Page 1 for Gapping Requirements
2 Have Questions?
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
1–800–BUY–TREX
TOJC-0725
Made with FlippingBook - Online catalogs