JSC CAN SERIES JOYSTICK
CYLINDERS
The all new JSC joystick is designed and manufactured for the rugged off-road market. Utilizing contactless Hall sensor technology, the JSC sets the standard in price/ performance for J1939 joysticks. The JSC offers excellent sealing, minimum below the panel depth, and mounting compatibility with our popular JSM joystick. The JSC is designed to operate with all our existing Handles, providing the ultimate in flexibility.
CYLINDER COMPONENTS
JACKS
VALVES
MOTORS
Input/Output: • Input: 10-30 VDC • Output: J1939 CANbus
PUMPS
ENGINES
74 mm • IP69K/IP67 sealing • Integrated connector • 125 V/m EMC Immunity • High strength Chromoly shaft • Supports nearly all Sure Grip handles Features: • Long life – tested to 10 million cycles (40 million operations)
POWER UNITS
78 mm
FILTRATION
GAUGES & METERS
78 mm
78 mm
CONTROLS
8.0 ID
Dimensions:
57.2 mm
5.5 OR M4
74 mm
FLUID COOLERS
74 mm
78 mm
78 mm
m
12.0
8.0 ID
HOSES & FITTINGS
8.0 ID
57.2 mm
10-32 TAPPED HOLE THROUGH BOTH SIDES
74 mm
57.2 mm
74 mm
78 mm
5.5 mm THROUGH OR M4x0.7 / #8 THREAD
COMPONENTS
91.5 mm
12.0
8.0 ID
70.5
JSC MOUNTING REQUIREM
58 mm
57.2 mm
10-32 TAPPED HOLE THROUGH BOTH SIDES 5.5 mm THROUGH OR M4x0.7 / #8 THREAD
74 mm
BEARINGS & BUSHINGS
57.2 mm
ED HOLE BOTH SIDES
12.0
91.5 mm
60.5 mm
62 mm
70.5
MOBILE PRODUCTS
57.2 mm
10-32 TAPPED HOLE THROUGH BOTH SIDES
58 mm
JSC MOUNTING REQUIREMENT
m
60.5 mm
NAME
DATE
TOLERANCES: (unless noted) 0.00 mm: +/- 0.05 mm 0.0 mm: +/- 0.1 mm 0 mm: +/- 0.3 mm 0 : +/- 0.5 0.0 : +/- 0.1
SLL 07FEB20
DRAWN
SURE GRIP CONTROLS
91.5 mm
70.5
JSC MOUNTING REQUIREMENT
If a 'Quality Inspection Sheet' is attached, then perform the required QC checks and provide results to SGC with the delivery of the parts. QUALITY INSPECTION Dimensions specified on this drawing to be measured on the finished part AFTER any surface finish is added.
MATERIAL
58 mm
62 mm PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Sure Grip Controls Inc. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Sure Grip Controls Inc. IS PROHIBITED.
JS-C Assemb
FINISH
SIZE DWG. NO. (REVISION) A
175
DO NOT SCALE DRAWING
SLL 07FEB20 NAME DATE
TOLERANCES: (unless noted) 0.00 mm: +/- 0.05 mm 0.0 mm: +/- 0.1 mm
62 mm
DRAWN
Made with FlippingBook flipbook maker