JSL SERIES JOYSTICK
CYLINDERS
The Sure Grip “JSL” Series Electronic Joystick is our second generation joystick that incorporates the newest Hall Effect sensor technology and advanced internal wire configuration. All of the electronics are located in a sealed cap to protect it from the harsh environment. Output options include CAN, Proportional, Switched, USB, and PWM. Single and dual axis spring-return-to-center or friction hold configurations also available. The Joystick can be configured with our JE, LE, KE and NE control grips. For standard options refer to configuration guide. Otherwise, contact us to learn how we can customize our products to meet your specific needs. “Gimbal Mounting” System The “JSL” Joystick also features our innovative “Gimbal Mounting” system that allows the joystick to be orientated in the most comfortable operating position. Up to 20 degrees of adjustment (off vertical) in any direction and 360 degrees rotation. This adjustment is accomplished with nothing more than a simple allen wrench. Electronics: The “JSL” Series Joystick incorporates Hall Effect sensor this is calibrated to provide a linear output relative to joystick position. This is designed to perform consistently in harsh environments that otherwise would not be feasible with mechanical sensing solutions such as potentiometers. Output Options: • J1939 CAN • Analog 0.5 - 2.5 - 4.5 vdc (single or dual redundant) • Switched 2.5A Solid State (with redundant analog outputs) • USB interface • PWM High Current Valve driver (four 2.5A PWM)
CYLINDER COMPONENTS
JACKS
VALVES
MOTORS
PUMPS
ENGINES
POWER UNITS
FILTRATION
GAUGES & METERS
5.79" (147 mm)
CONTROLS
FLUID COOLERS
HOSES & FITTINGS
Features: • Adjustable gimbal mounting system • Long life - tested to 20 million operations • Rugged design • Proportional and Switched outputs • Operating temperature: -40°C to +85°C • Sealing up to IP67 (handle dependent) • EMC: 100V/m • Fully sealed and encapsulated electronics • Supports all Sure Grip handles (best suited for our JE, LE, KE, NE)
2.84"
(72.0mm)
COMPONENTS
1.42" (36.0mm)
Ø 0.20" (x4) (5.1mm)
BEARINGS & BUSHINGS
Ø 2.83"
(72.0mm) Cut-out
MOBILE PRODUCTS
Panel
SURE GRIP CONTROLS
Recommended mounting panel cutout.
177
Made with FlippingBook flipbook maker