HYDRAULIC VALVES
DIRECTIONAL CONTROL VALVES
CYLINDERS
CHIEF™ - Fine Metering Spools - 13 GPM
TANDEM CENTER - used for double acting cylinders work ports blocked in neutral FLOAT POSITION - when in the float detent, work ports are open to tank to allow cylinder to “float”
CYLINDER COMPONENTS
• 13 GPM - 3625 PSI • Adjustable relief range 2250-3625 PSI (factory set at 2500 PSI) • Cast Iron Construction • Precisely machined hydraulic channels provide improved throughput and metering PART NO. GPM PSI NO. OF SPOOLS TYPE SPOOL
• No load check • 4th position float
JACKS
PORT SIZE
SHIP WT.
VALVES
MSRP YOUR PRICE
ACTION
IN/OUT WORK
fine metering spring center to neutral with 4th pos. float detent fine metering spring center to neutral with 4th pos. float detent fine metering spring center to neutral with 4th pos. float detent
4-way 4 pos tandem center with 4th pos. float 4-way 4 pos tandem center with 4th pos. float
$184.11
220871
13 3625
1
SAE 10 SAE 8 7 $224.52
MOTORS
220872
$323.25
13 3625
2
SAE 10 SAE 8
12
$394.21
PUMPS
$466.56
220873
13 3625
3 4-way 4 pos tandem center with 4th pos. float
SAE 10 SAE 8 17 $568.98
Accessories – see PG 62 Chief G Series 10 GPM for Detent Kit, Closed Center Plug & Power Beyond Plug.
ENGINES
CHIEF™ P70 - Tandem Metering (Brand Valve Replacements) • Flow Range from 0-18 GPM - 3000 PSI • Pressure compensation along with fine metering allows precise control over the speed of the actuator, regardless of the load
POWER UNITS
• 1 Spool - Precision ground chromium plated spool assures long life • Full range pressure compensated by-pass type flow control valve built in PART NO. GPM NO. OF SPOOLS TYPE ACTION SPOOL
• Adjustable pilot operated relief • Fine metering in either direction
FILTRATION
PORT SIZE
SHIP WT.
MSRP YOUR PRICE
IN/OUT WORK
GAUGES & METERS
220790 220791 220792 220789
$297.10 $297.10 $297.10 $297.10
0-6 0-12 0-12 0-18
1 1 1 1
4-way 3 pos. fine metering
spring center to neutral
3/4 NPT 1/2 NPT 7 $362.32 3/4 NPT 1/2 NPT 6 $362.32 SAE 12 SAE 10 6 $362.32 3/4 NPT 1/2 NPT 6 $362.32
4-way 3 pos. tandem metering spring center to neutral 4-way 3 pos. tandem metering spring center to neutral 4-way 3 pos. tandem metering friction detent
CONTROLS
BAILEY™ - Directional Control Valve With Microswitch - 12 GPM
• Normally open (NO) microswitch triggered to closed when valve is shifted from the neutral position • Mircoswitch has a female connector with a male end • Direct acting relief set at 2,175 PSI (150 bar), adjustable from 900 to 2900 PSI • Cast Iron construction, built in load check on spool • Relief cartridges available for 580-1150 psi or 2300-4600 PSI
FLUID COOLERS
HOSES & FITTINGS
PART NO.
NO. OF SPOOLS
SHIP WT.
GPM MAX PSI
TYPE
ACTION
VOLTAGE PORT SIZE
MSRP YOUR PRICE
COMPONENTS
12VDC at 10A or 24VDC at 3A SAE 8 6 $190.38
228958
$156.11
12
4600
1
4-way, 3 pos. spring center to neutral with normally open microswitch
BEARINGS & BUSHINGS
CHIEF™ - Directional Control Valve with Micro-switch - 10 GPM • 10 GPM - 3625 PSI • Cast Iron Construction • Relief setting at 1500 PSI • Good for systems that operate with a battery
MOBILE PRODUCTS
• Micro-switch affixed to end that allows valve to trigger micro-switch when it is shifted from neutral and release when shifted back to neutral • Load check
SURE GRIP CONTROLS
SPOOL
PORT SIZE
PART NO.
SHIP WT.
GPM NO. OF SPOOLS
MSRP YOUR PRICE
TYPE
ACTION
IN/OUT WORK
spring center to neutral with microswitch
220899
$153.77
10
1
4-way 3 pos. tandem center
SAE 10 SAE 8 7 $187.53
68
Prices subject to change. For the most accurate pricing, please refer to our website at Baileyhydraulics.com or call one of our Customer Experience Representatives at 1-800-800-1810.
Made with FlippingBook flipbook maker