Test Setup You can build your force measurement test using templates based on commonly performed test methods, or using the powerful, yet easy to use L2 Plus Test Builder application. With L2 Plus test setup, you construct your test using steps. There are a set of step types for tension, compression, holds, cycling and more. Steps have attributes that you configure such as limits and speed, plus exceptions that cause the test to stop if an event occurs. With the L2 Plus Series software you can construct simple single step tests, e.g. go to a break, or you can create sophisticated multiple steps tests such as go to a limit, hold, go to the next limit hold, end when the sample breaks or the time duration ends.
Test Performance Performing an L2 Plus Series test is as simple as pressing a push button. Once you create your test, or select the test setup from your directory of tests, just select START TEST on the touchscreen or press the Start/Stop push button on your test frame. The test will begin. You may stop your test at any time by selecting the STOP TEST target or by pressing the Start/Stop push button on your test frame.
Start/Stop Test Soft Targets on Controller View
Single Step L2 Plus Test Setup
Multi-step L2 Plus Test Setup
starrett.com
9
Made with FlippingBook - professional solution for displaying marketing and sales documents online