3.3.4.2 Cycle for Duration Step Instead for cycling your steps based on a count, you can cycle based on time. You may set a cycle time duration for up to 30 minutes. You enter time using minutes or seconds. If you want a 30 minute cycle time, you would enter the number 1800 (30 min x 60 sec = 1800 sec) or enter 30 then a decimal point. • Select the Cycle symbol • Select the Cycle Time symbol • Select the first step where the cycle will begin • Specify the Time Duration (in seconds) the cycle shall be performed
NOTE The maximum duration for a test is 48 hours.
NOTE The maximum number of data points for a test is 100,000. Adjust the Sampling Rate (Hz) accordingly for your test.
NOTE When you enter the Duration time, always enter using seconds.
Enter the time as a whole number in seconds. 28000 would represent 7 hrs and 46 minutes and 40 seconds.
L2 Plus Test Builder - Cycle Time Step Cycles selected steps for a time duration
L2 Plus Test Builder - Cycle Steps
28
Made with FlippingBook - professional solution for displaying marketing and sales documents online