3.2.1.4 Batch Name The Pre Test step lets you create a batch for your test runs. A batch may be used to categorize the test runs within a test setup. For example, you may have a common test setup, but you want to test a batch of samples coming from different lots. You can distinguish one lot from the other by using a Batch Name for each lot. 3.2.1.5 Batch Size When you use a batch, you can specify the number of test runs you are going to perform within the batch. So, if you have many samples, you may need to test each of 10 samples for that lot. Your Batch Size will be identified as 10. During your testing, once you complete test run 10, the L2 Plus software will ask if you want to continue with the current batch, which means you can add additional runs to the Batch, or you can decide to complete that lot and begin a new batch. If you decide to create a new batch, the name of the existing batch will be used with a suffix number 1. You may change the name of your Batch name if you wish.
L2 Plus Test Builder - Pre Test Batch setup Enter your Batch Name and Batch Size
The Batch Name is identified above each test run in the Runs List.
L2 Plus Graph view Shows how the Batch Name is used in the Runs List
starrett.com
9
Made with FlippingBook - professional solution for displaying marketing and sales documents online