4.2.5 Test/Step Velocity Indicator During a test run, the crosshead’s current velocity is displayed with the units of measure for speed.
4.3 L2 Plus Status Messages During a test, the L2 Plus software displays a status message in the message box area. The status message will generally advise the user of the current test step being performed and key step parameters for that step. Certain messages, such as Ask messages, require the user to enter information before the test step can continue. 4.3.1 Step Messages Test setups are made up of a series of test steps. During a test run, your L2 Plus Series software displays step messages that alert the user to the current step being performed. These messages are described in the following sections.
During each test step, the crosshead velocity is displayed in both the main Controller view and in the Step Message box (bottom).
Test Setup for My Tensile Test Step 2 is being performed
A Step message is displayed for each test step is the test setup. Included is the Step Number and the key step parameters, e.g. Limit, Direction, Speed.
Step Direction
Step Number
Active crosshead speed Velocity displayed during a test step
10
Made with FlippingBook - professional solution for displaying marketing and sales documents online