4.3.1.5 Cycle Count Message A Cycle Count step is used to cycle steps in a series. You specify the step numbers you want to cycle and using a count, you specify the number of times this series of steps should be repeated. The Cycle Count step message will tell you the count number of your cycle series.
4.3.1.7 Prompt Message Prompt messages are useful to inform the test operator of important information regarding the test or the current step within a test. Prompts are simply messages that require no operator response and are used to inform the operator. A Prompt message requires a time duration. A Prompt message may be up to 100 characters in length.
Current Step Type
Time remaining for Tell prompt
Crosshead velocity of the current Step 2
Prompt Type Tell
Cycle Number 2 of 3
Display prompt for this time duration
The prompt, which advises the operator, is displayed on the main graph view for the time duration specified. The operator can extinguish the prompt by selecting this marker.
Cycle Count Step Message
4.3.1.6 Cycle Duration Message A Cycle Duration step is used to cycle steps in a series. You specify the step numbers you want to cycle and using a time duration you specify the time duration this series of steps should be repeated. The Cycle Time step message will tell you the time remaining for your cycle series. When the time expires, the test setup will move to the next step.
Tell Step Message Requires no operator response
Current Step Type
Cycle Duration Remaining Time
Crosshead velocity of the current Step 3
Cycle Duration Step Message
12
Made with FlippingBook - professional solution for displaying marketing and sales documents online