5.8.2.3 Minimum Algorithm Where The WHERE function is used to specify where you want the Minimum result to display. Display the point on any of these views: • Results View • Graph Views using a Marker • Data Views (a column within the table)
5.8.2.4 Minimum Algorithm Tolerance Your Minimum result (coefficient) can make use of a tolerance to dis- tinguish the result as either a “pass” or “fail” relative to your tolerance limits. When you use a tolerance, you specify two tolerance limits. If your result equals or falls within the range created by these two tolerances, the result is displayed in black text and is deemed a “pass”. If the result falls outside the tolerance range, the result displays in red text and is deemed a “fail”. Your L2 Plus Series software also features a Tolerance view (TOL) that displays a tendency graph for the result. This graph displays whether the actual result is at the high or low end of the tolerance range you have established.
Lmin for test run #1 has an Lmin of 14.19N, which is below the tolerance range.
Lmin for test run #5 has an Lmin of 18.30N, which exceeds the tolerance range.
Break Test Shows Lmin result for specified scope range with tolerances
44
Made with FlippingBook - professional solution for displaying marketing and sales documents online