General Safety & Operating Tips Always wear appropriate eye protection, clothing, gloves and respirator or dust mask. Work on ladders and roofs should only be attempted by experienced individuals that have the proper knowledge and ability to execute all safety procedures. Be aware of all electrical hazards when working with ladders and all other equipment. Keep all loose clothing tucked in to prevent being tangled in rotating rods. Add one rod at a time when spinning into chimney. CAUTION ¾ To avoid rod breakage, never spin rods in sharp/tight bend angles as shown below! ¾ Always use a “Back & Forth” motion while spinning rods to prevent screws in flue pipe from cutting through rods.
Wrong! Rods will break if spun at this tight bend radius.
Not Recommended! Rods may break if spun at this angle.
Correct! Spin rods at the least amount of angle for best results. Always use a “Back & Forth” motion while spinning to prevent breakage.
CAUTION Cleaning through thimble is not recommended as it may cause rod breakage due to the sharp bend
Use the least amount of bend to avoid breakage
Avoid spinning rods at sharp angles
5
Made with FlippingBook - professional solution for displaying marketing and sales documents online