Transfer Trailers - Owner's Manual

TRANSFER TRAILERS

OWNER’S MANUAL

For more information, visit us at www.MACTrailer.com or call us 1-800-795-8454

1. Introduction And Warranty.................................................................................................................................3 1.1 Introduction............................................................................................................................................................3 1.2 Warranty ................................................................................................................................................................3 2. Safety....................................................................................................................................................................4 2.1 Safety ....................................................................................................................................................................4 2.2 Towing Hazards....................................................................................................................................................4 2.2.1 Driving Too Fast...........................................................................................................................................4 2.2.2 Trailer Not Properly Coupled to truck...........................................................................................................5 2.2.3 Overloading ..................................................................................................................................................5 2.2.4 Improper Load Distribution...........................................................................................................................5 2.2.5 Shifting Cargo...............................................................................................................................................6 2.2.6 Inappropriate Cargo......................................................................................................................................6 2.3 Brakes and Lights..................................................................................................................................................6 2.4 Clearance ..............................................................................................................................................................6 2.5 Hydraulics..............................................................................................................................................................7 2.6 Maintenance ..........................................................................................................................................................7 2.7 Hazards From Modifying Your Trailer...................................................................................................................7 2.8 Safety Warning Labels on Your Trailer.................................................................................................................7 2.9 Reporting Safety Defects....................................................................................................................................10 3. Coupling Truck To Trailer ................................................................................................................................11 3.1 Providing an Adequate Truck..............................................................................................................................11 3.2 Trailer Information...............................................................................................................................................11 3.3 Before Attempting To Couple Truck To Trailer...................................................................................................12 3.4 Couple Truck to Trailer........................................................................................................................................12 3.5 Pretrip Inspection................................................................................................................................................15 4. Towing Trailer....................................................................................................................................................17 4.1 Lift Axle(s) ...........................................................................................................................................................17 4.2 Wheels and Tires................................................................................................................................................18 4.3 Alignment ............................................................................................................................................................18 5. Loading And Unloading The Trailer................................................................................................................19 5.1 Load Trailer.........................................................................................................................................................19 5.2 Unload trailer.......................................................................................................................................................19 5.2.1 Trailers With Side Swing Tail Gate.............................................................................................................19 5.2.2 Trailers With Double Doors........................................................................................................................21 6. Uncouple Truck.................................................................................................................................................23 6.1 Uncouple Truck from Trailer................................................................................................................................23 7. Accessories And Options ................................................................................................................................25 7.1 Air Flow Door.......................................................................................................................................................25 7.2 Bulkhead Door.....................................................................................................................................................26 8. Inspections And Lubrication............................................................................................................................27 8.1 Every Day............................................................................................................................................................27 8.1.1 Inspect Trailer Body, Chassis And Fasteners............................................................................................27 8.2 Every Week.........................................................................................................................................................28 8.2.1 Lubrication ..................................................................................................................................................28 8.2.2 Trailer Suspension......................................................................................................................................29 8.2.3 Drain Trailer Air Tanks................................................................................................................................29 8.2.4 Inspect, Measure And Adjust Brakes.........................................................................................................30 8.3 Every Six Months................................................................................................................................................31 8.3.1 Air In-Line Filter..........................................................................................................................................31 8.3.2 Glad Hand Seals and Screens...................................................................................................................32 9. Maintenance And Service.................................................................................................................................33 9.1 Tires.....................................................................................................................................................................33 9.2 Wheels ................................................................................................................................................................33 9.2.1 Spoke Wheels.............................................................................................................................................34 9.2.2 Disk Wheels................................................................................................................................................34 9.2.3 Wheel Ends................................................................................................................................................35

1. I NTRODUCTION A ND W ARRANTY

1.1 INTRODUCTION Read and understand this manual before using your trailer and follow all of the safety instructions. Keep all manuals provided with your trailer in a safe place inside your truck at all times. Some components on your MAC trailer have separate instruction manuals. Where this manual indicates that you should read another manual, and you do not have that manual, contact your dealer or MAC Trailer for assistance. Information provided in this manual was current as of the issue date. MAC Trailer reserves the right to make design changes without further notice or liability. 1.2 WARRANTY For warranty information, see your warranty manual.

2. S AFETY

2.1 SAFETY This Owner’s Manual covers walking floor and tipper trailers produced by MAC Trailer. Before towing, operating or servicing a MAC trailer, you must read, understand and follow the instructions and safety warnings in this manual. Your trailer may not be equipped with some of the optional equipment shown in the illustrations in this manual. The safety information in this manual is denoted by the safety alert symbol: ^ The level of risk is indicated by the following signal words.

^ DANGER

DANGER – Indicates a hazardous situation, which, if not avoided, will result in death or serious injury.

^ WARNING

WARNING – Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.

^ CAUTION

CAUTION – Indicates a hazardous situation, which, if not avoided, could result in minor or moderate injury.

NOTICE

NOTICE – Indicates a situation that could result in damage to the trailer or other property. 2.2 TOWING HAZARDS Loss of control of the truck/trailer combination can result in death or serious injury. The most common causes for loss of control are:

Driving too fast. Incorrect coupling.

x x x x x

Overloading.

Improper load distribution.

Shifting cargo.

2.2.1 DRIVING TOO FAST If you drive too fast, the trailer is more likely to sway, thus increasing the possibility for loss of control.

^ WARNING

Collision Hazard. Driving too fast for conditions can result in loss of control and may result death or serious injury. Adjust speed down when towing trailer.

Safety

2.2.2 TRAILER NOT PROPERLY COUPLED TO TRUCK A secure coupling is vital. Uncoupling can result in death or serious injury.

^ WARNING

Collision Hazard. An improperly coupled trailer can result in death or serious injury. Before towing trailer, verify that: x The coupler is properly secured and locked. x Trailer landing gear is fully retracted. x Lights and air hoses connected. x Perform pre-trip inspection.

2.2.3 OVERLOADING An overloaded trailer can result in loss of control, which may result in death or serious injury. Overloading may also result in tire, wheel, axle or structural failure, and also increased stopping distances.

^ WARNING

Collision Hazard. An overloaded trailer can result in death or serious injury. Do not load a trailer so that the Gross Vehicle Weight Rating (GVWR) or Gross Axle Weight Rating (GAWR) is exceeded.

2.2.4 IMPROPER LOAD DISTRIBUTION Improper load distribution can result to poor trailer stability and handling. Refer to “Loading the Trailer” for more information. Uneven load distribution can cause tire, wheel, axle or structural failure, and can result in the trailer rolling over while dumping. Be sure your trailer is evenly loaded left-to-right and front-to-rear. Keep the center of gravity as low as possible.

^ WARNING

Collision Hazard. An improperly loaded trailer can result in failure or loss of control, leading to death or serious injury. Evenly distribute the load through out the trailer.

Safety

2.2.5 SHIFTING CARGO Be certain doors are properly latched to prevent the door from opening while towing.

^ WARNING

Collision Hazard. If a door opens, your cargo can spill onto the road, which could result in death or serious injury to other drivers. Verify doors are properly closed and latched. INAPPROPRIATE CARGO Carry only the cargo that your trailer was designed for. A trailer must not be used to carry certain items, such as people, containers of hazardous substances or containers of flammable substances. 2.2.6

^ WARNING

Never transport people in a trailer. Do not transport flammable, explosive, poisonous or other dangerous materials in your trailer. 2.3 BRAKES AND LIGHTS Be sure that the brakes and all of the lights on your trailer are functioning properly before towing your trailer.

^ WARNING

Collision Hazard. Failure to connect the electrical connector and air hoses will result in inoperable trailer lights and brakes, and can lead to collision. Before each tow, verify that all lights work.

2.4 CLEARANCE

^ WARNING

Collision Hazard. Know the height, width and length of the trailer. Always be aware of clearances.

Safety

2.5 HYDRAULICS

^ WARNING

Pressurized fluids can penetrate the skin. Hydraulic hoses can fail from age, damage and exposure.

Do not search for hydraulic leaks without body and face protection. A tiny, almost invisible leak can penetrate the skin, thereby requiring immediate medical attention. Use wood or cardboard to detect hydraulic leaks, never your hands.

2.6 MAINTENANCE

^ WARNING

Crushing Hazard. Before performing trailer inspections, service or maintenance: x Park trailer on firm, level surface. x Set brakes, turn truck engine off and remove ignition key. x Chock tires if brakes are to be released. x Support trailer with properly rated and placed stands.

2.7 HAZARDS FROM MODIFYING YOUR TRAILER Before making any alteration to your trailer, contact your dealer or MAC Trailer and describe the alteration you are contemplating. Altering your trailer may void the manufacturers warranty. See “Warranty” in Section 1. 2.8 SAFETY WARNING LABELS ON YOUR TRAILER

Figure 2-1 – Curb And Street Side Rear Safety Labels

Safety

Figure 2-2 – Front Safety Label

Figure 2-3 – Suspension Safety Labels

Safety

Figure 2-4 – ABS Safety Label

Figure 2-5 – Mid-Drivers Side Labels

Safety

Figure 2-6 – Front Drivers Side Label

Other decals required if equipped:

x Bag pressure gauge decal & high lift gate (located near suspension) x Canada unit only (near the dolly on driver side) #28800532, #28800531, #28800530

^ WARNING

To protect against death or serious injury, all labels must be on the trailer and must be legible. If any of these labels are missing or cannot be read, call MAC Trailer at 1-800- 795-8454 for replacement labels.

2.9 REPORTING SAFETY DEFECTS If you believe that your vehicle has a defect that could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying us. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or MAC Trailer. To contact NHTSA, you may either call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424- 9153), go to http://www.safercar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. You can also obtain other information a about motor vehicle safety from http://www.safercar.gov.

3. C OUPLING T RUCK T O T RAILER

3.1 PROVIDING AN ADEQUATE TRUCK The truck must be matched to the Gross Vehicle Weight Rating (GVWR) of your trailer. If you already have a truck, know your trucks tow rating and make certain the trailer’s rated capacity is less than or equal to the tow vehicle’s rated towing capacity.

^ DANGER

Collision Hazard. Use of an under-rated truck could result in loss of control, and can lead to death or serious injury. Be sure your truck is rated for the Gross Vehicle Weight Rating (GVWR) of your trailer.

3.2 TRAILER INFORMATION The Certification / VIN tag is located on the left side of the trailer, near the landing gear. See figure 3-1.

Figure 3-1 - Certification / VIN Tag Location

The trailer Certification / VIN tag contains the following information: MANUFACTURER: MAC Trailer Manufacturing, Inc. DATE OF MANUFACTURE: Month and year the trailer was manufactured. GVWR WITH _____ RIMS: The Gross Vehicle Weight Rating is the maximum allowable gross weight of the trailer and its contents with the listed wheel rims. FRONT GAWR: The Gross Axle(s) Weight Rating is the maximum gross weight that the front axle(s) can support. REAR GAWR: The Gross Axle(s) Weight Rating is the maximum gross weight that the rear axle(s) can support. TIRE SIZE: The tire size recommended for your trailer and load range. PSI: The “pounds per square inch” is the tire pressure (Kilopascals / Pounds per Square Inch) measured when Cold.

Coupling Trailer To Truck

VIN: The Vehicle Identification Number. VEHICLE TYPE: Semi Trailer. CERTIFICATION STATEMENT: “This trailer meets all the Federal Motor Vehicle Safety Standards in effect on the date of manufacture shown above”. 3.3 BEFORE ATTEMPTING TO COUPLE TRUCK TO TRAILER 1. Check the condition of the kingpin and mounting plate. Wipe the kingpin clean and inspect it for flat spots, cracks and pits.

^ WARNING

Uncoupling Hazard. A worn, bent or damaged kingpin can fail while towing, which can result in death or serious injury. Inspect the kingpin and kingpin plate for wear and damage. Replace a worn or damaged kingpin or kingpin plate before towing trailer.

2. Verify that the kingpin plate and fifth wheel fasteners are tight and welds are sound.

^ WARNING

Uncoupling Hazard. A loose kingpin or fifth wheel can result in the trailer uncoupling, which can result in death or serious injury. Verify the kingpin and fifth wheel are tight.

3. Lubricate the fifth wheel lock mechanism and verify it will move freely. 4. Clear all hoses and electrical cables from the coupling area. 5. Verify the fifth wheel locks are open.

WARNING

Crushing Hazard. Death or serious injury may occur if the trailer drops. Keep bystanders away from trailer while coupling.

3.4 COUPLE TRUCK TO TRAILER 1. Place wheel chocks behind the trailer tires. 2. Place the truck directly in front of the trailer. See figure 3-2. NEVER back under the trailer at an angle.

Coupling Trailer To Truck

Figure 3-2 Align Truck With Trailer For Coupling

3. Back the truck until close to the trailer. 4. Apply the truck parking brakes and place transmission in neutral. 5. Release air from truck suspension (if equipped).

6. Inspect the height of the trailer vs the fifth wheel. The kingpin plate on the front of the trailer should first contact the fifth wheel 4-6 inches rearward of the fifth wheel centerline. See figure 3-3. The trailer should raise slightly when the truck is backed under it. If the trailer is too low, the truck may strike and damage the front of the trailer. If the trailer is too high, it will not couple correctly. Adjust the landing gear as needed to achieve the correct trailer height.

^ WARNING

Uncoupling Hazard. Trailer must be at the correct height to couple to truck. Verify trailer is at the proper height before coupling.

Figure 3-3 Coupling Truck To Trailer

7. Verify that the kingpin and fifth wheel are aligned. 8. Slowly back the truck keeping the kingpin aligned with the fifth wheel. Continue backing until the fifth wheel locks firmly on the kingpin. Attempt to pull forward as a test to verify the fifth wheel is locked. Do not attempt to move the truck and trailer at this time. Apply the truck parking brake and place transmission in neutral. 9. Inspect the coupling. See figure 3-4. Verify there is no space between the kingpin plate and the fifth wheel. If there is space, the kingpin may be on top of the fifth wheel jaws. Raise the trailer with the landing gear, pull the fifth wheel release lever and pull the truck ahead. Repeat steps 6-9 again to couple the trailer correctly.

Figure 3-4 Fifth Wheel Checks

Coupling Trailer To Truck

10. Go under the trailer with a flashlight and look in the back of the fifth wheel. Verify the fifth wheel jaws (A) have closed around the shank of the kingpin and the fifth wheel lock lever is in the locked position. See figure 3-5.

Figure 3-5 Fifth Wheel Jaws Closed Around Kingpin Shank

11. Inflate the truck suspension (if equipped). 12. Connect the supply hose to glad hand (A), service hose to glad hand (B), electrical connector and if equipped, connect hoses to the lift axle and tailgate glad hands. See figure 3-6.

Figure 3-6 Connect Hoses And Electrical Connector 13. On walking floor trailers, connect the pressure (A) and return (B) hydraulic hoses to the couplers on the truck. See figure 3-7.

^ WARNING

Pressurized fluids can penetrate the skin. Hydraulic hoses can fail from age, damage and exposure.

Coupling Trailer To Truck

Figure 3-7 Connect Walking Floor Hydraulic Hoses 14. Raise the landing gear. MAC Trailer uses a two speed landing gear from several different manufacturers. High speed may be “in” on some models and “out” on others. Engage the crank handle (A) to the shaft and turn to retract the landing gear. Return the two speed landing gear crank handle to the storage position. See figure 3-8.

Figure 3-8 - Two Speed Landing Gear 15. Press the trailer air supply valve in the truck to fill the trailer air tanks. Do not release parking brakes. 16. Perform pretrip inspection. See section 3.5. 3.5 PRETRIP INSPECTION Perform the inspections and checks before towing trailer: x Check that ABS light on street side rear corner of the trailer is not illuminated. x Check that all safety decals are in place and in good, readable condition. x Check that all reflectors and in place and in good condition. x Check air pressure on all tires. Air pressure is listed on the Certification/VIN tag. x Check and inspect all tires. If a tire has a bald spot, bulge, cut or cords showing, replace the tire(s) before towing trailer. x Check wheel lug torque. See the Maintenance Section of this manual. x Check the wheel hubs for signs of lubricant leakage. x Check for broken or missing leaf springs or verify that air suspension springs are inflated. x Check electrical harness and air hoses from truck for damage. x Listen for air leaks in hoses and air suspension (if equipped). x Check all lights for operation.

Coupling Trailer To Truck

x Check brakes for wear and adjustment, and verify the brakes function properly. Repair or replace any worn, damaged, leaking, broken or non-functioning items before towing the trailer.

4. T OWING T RAILER

4.1 LIFT AXLE(S) Your trailer can be equipped with one or more lift axles and may be equipped with a regulator valve. With trailer loaded, the axle(s) are lowered to help carry and distribute the load forces on the trailer. Turn the valve (A) to set the air pressure to the desired level. See figure 4-1.

Figure 4-1 Lift Axle Regulator Valve Use the correct chart below for the axle(s) on your trailer to set the air pressure.

AAL,AAT & AAZNT C-20901,C-23611, C-23612, C-23721, C-23748 SUSPENSION LOAD SCALE INTRAAX 250 GAUGE LOAD PER AXLE 24 PSI 165 KPA 7000 LB 3175 KG 32 PSI 221 KPA 9000 LB 4082 KG 40 PSI 276 KPA 11000 LB 4990 KG 48 PSI 331 KPA 13000 LB 5897 KG 56 PSI 386 KPA 15000 LB 6804 KG 65 PSI 448 KPA 17000 LB 7711 KG 72 PSI 496 KPA 19000 LB 8618 KG 80 PSI 552 KPA 21000 LB 9526 KG 88 PSI 607 KPA 23000 LB 10433 KG 96 PSI 662 KPA 25000 LB 11340 KG 5-5 MAC TRAILER MANUFACTURING INC. 28800529

AAL,AATC-25871,C-23611, C-25872 & C-25873 SUSPENSION LOAD SCALE INTRAAX 300 GAUGE LOAD PER AXLE 30 PSI 207 KPA 10000 LB 4536 KG 37 PSI 255 KPA 12000 LB 5443 KG 44 PSI 303 KPA 14000 LB 6350 KG 51 PSI 352 KPA 16000 LB 7258 KG 58 PSI 400 KPA 18000 LB 8165 KG 64 PSI 441 KPA 20000 LB 9072 KG 71 PSI 490 KPA 22000 LB 9979 KG 78 PSI 538 KPA 24000 LB 10886 KG 85 PSI 586 KPA 26000 LB 11794 KG 92 PSI 634 KPA 28000 LB 12701 KG 99 PSI 683 KPA 30000 LB 13608 KG 5-5 MAC TRAILER MANUFACTURING INC. 28800530

With the trailer empty, raise the axle(s) off the surface by relieving the air pressure on the lift axles.

^ WARNING

Collision Hazard. An empty trailer with the lift axle(s) in the down position can be unstable while towing, which can result in loss of control. Raise the lift axle(s) off the surface on an empty trailer before towing.

4.2 WHEELS AND TIRES Uneven tread wear can be caused by tire imbalance, axle misalignment or improper inflation. If you observe uneven tread wear, take the trailer to an authorized truck/trailer service center for diagnosis. Trailer wheels and lugs are subjected to high side loads. This can cause the wheel lugs to become loose. Check to be certain wheel lugs are tightened to 450-500 lb ft of torque. Refer to the maintenance section for the proper tightening procedure. Failure to perform this check may result in a wheel parting from the trailer, and a crash leading to death or serious injury. You must use a torque wrench to obtain the proper tightening of the lug nuts. 4.3 ALIGNMENT Properly aligned trailer axles optimize fuel economy and driveability, and help prevent excessive tire wear. A perfect alignment scenario has all trailer wheels parallel to one another and perpendicular to the centerline of the trailer. However due to uncontrollable factors, this perfect scenario is often an unreasonable expectation. A more likely alignment scenario has the trailer wheels parallel within a very small tolerance range to one another and perpendicular within a very small tolerance range to the centerline of the trailer. There are two important trailer axle angles that must be kept within recommended tolerance ranges: thrust angle and scrub angle. These angles, when out of tolerance, can lead to increased rolling resistance, excessive tire wear and can contribute to trailer “dog tracking.” Dog tracking is a condition where the trailer does not follow or track directly behind the truck as the vehicle is being operated in a straight line and is influenced by body rail alignment, king pin location, axle side-to-side location, and other things. If realignment is necessary, take the trailer to your dealer or an authorized trailer service center.

5. L OADING A ND U NLOADING T HE T RAILER Improper trailer loading causes many accidents and deaths. To safely load a trailer, you must consider the overall load weight and load distribution. The load distribution must be such that no component part of the trailer is loaded beyond its rating. You must be sure that the load distribution does not exceed the rating of the tires, wheels and axles.

^ WARNING

Collision Hazard. An overloaded trailer can result in death or serious injury. Do not load a trailer so that the Gross Vehicle Weight Rating (GVWR) or Gross Axle Weight Rating (GAWR) is exceeded. 5.1 LOAD TRAILER 1. Load the material onto the trailer, distributing the material evenly throughout the trailer. 2. Weigh the trailer to be sure you have not exceeded the weight capacity of the trailer, tires, axles and wheels. 3. All loaded trailers should be covered with a tarp. 5.2 UNLOAD TRAILER 5.2.1 TRAILERS WITH SIDE SWING TAIL GATE 1. Park the truck and trailer on a firm surface and set the parking brakes. 2. Release tension on winder (A), pin in the open position and release chain (B) from anchor. See figure 5-1.

^ WARNING

Risk of death or serious injury from tailgate and/or falling materials. Loaded materials can exert pressure against the tailgate, causing the tailgate to swing out with force when unlatched. Materials may fall from trailer when tailgate is unlatched. Do not stand behind tailgate when unlatching.

Figure 5-1 Open Winder And Release Chain

Loading And Unloading The Trailer

3. Pull out on latch (C) to release tail gate. See figure 5-2.

Figure 5-2 Release Tail Gate Latch 4. Swing tail gate fully open and insert chain (D) into anchor. Chain must be tight to prevent damage to the door. See figure 5-3.

Figure 5-3 Anchor Door In Open Position

5. Moving Floor Trailer Only: Refer to the manufacturers information provided with your moving floor for safety and operational information.

^ WARNING

Crushing Hazard. Never go under trailer body or enter the trailer while the moving floor is in operation. Remain at the controls while moving floor is in operation.

6. Disengage PTO. 7. Set parking brakes and verify the trailer is empty.

Loading And Unloading The Trailer

^ CAUTION

Pinching Hazard. Latch handle can pinch fingers between handle and trailer. Grasp tail gate latch only by the handle grip to close.

Figure 5-4 Grasp Handle By Grip When Closing

8. Close the tail gate and engage latch. 9. Position winder on tail gate and tighten. 10. Insert door chain in anchor. 11. Remove any loose material on the trailer before leaving site. TRAILERS WITH DOUBLE DOORS 1. Park the truck and trailer on a firm surface and set the parking brakes. 5.2.2

^ WARNING

Risk of death or serious injury from doors and/or falling materials. Loaded materials can exert pressure against the doors, causing the doors to swing out with force when unlatched. Materials may fall from trailer when doors are unlatched and opened. Use caution when unlatching and opening doors. 2. Remove door chains from hooks (A), release latches (B) and carefully open right side door. See figure 5-5.

Loading And Unloading The Trailer

Figure 5-5 Open Double Doors 3. Swing tail gate fully open and insert chain (C) into anchor. Chain must be tight to prevent damage to the door. See figure 5-6. Release latches, open and anchor left side door.

Figure 5-6 Anchor Door In Open Position

4. Moving Floor Trailer Only: Refer to the manufacturers information provided with your moving floor for safety and operational information.

^ WARNING

Crushing Hazard. Never go under trailer body or enter the trailer while the moving floor is in operation. Remain at the controls while moving floor is in operation.

5. Disengage PTO. 6. Set parking brakes and verify the trailer is empty. 7. Close the doors and engage latches. 8. Place door chains in hooks. 9. Remove any loose material on trailer before leaving site.

6. U NCOUPLE T RUCK

6.1 UNCOUPLE TRUCK FROM TRAILER 1. Park the trailer on a firm level surface. 2. Set the parking brakes. 3. If trailer is loaded, place blocks or pads under landing gear legs to prevent settling.

4. MAC Trailer uses a two speed landing gear from several different manufacturers. High speed may be “in” on some models and “out” on others. High speed is used only when landing gear is off the ground. Engage the crank handle (A) and lower the landing gear until it makes firm contact with the ground, blocks or pads. Switch to low gear and crank an additional 4-8 turns. See figure 6-1.

Figure 6-1 Two Speed Landing Gear 5. Disconnect the supply hose from glad hand (A), service hose from glad hand (B) and electrical connector. See figure 6-2.

Figure 6-2 Disconnect Hoses And Electrical Connector 6. On moving floor trailers, disconnect the pressure (A) and return (B) hydraulic hoses from the couplers on the truck. See figure 6-3.

Uncouple Truck

Figure 6-3 Connect Walking Floor Hydraulic Hoses

7. Pull the fifth wheel release lever. 8. Release air in truck suspension (if equipped) and pull truck forward until fifth wheel comes out from under the trailer. 9. Stop with truck frame under trailer. This will prevent the trailer from falling to the ground if the landing gear should collapse or sink. 10. Apply parking brake and place transmission in neutral. 11. Make sure ground is supporting trailer. Make sure landing gear is not damaged. 12. Check the area and drive truck forward until clear of trailer.

7. A CCESSORIES A ND O PTIONS

7.1 AIR FLOW DOOR Your trailer may be equipped with an air flow door to help improve your fuel efficiency. See figure 7-1.

Figure 7-1 Air Flow Door Open And Closed 1. To open the air flow door, unscrew and remove latch and swing door against side of trailer. See figure 7-2.

Figure 7-2 Open Latch 2. Insert latch through hole in door and into threaded hole in trailer wall. Tighten latch securely. See figure 7-3.

Options And Accessories

Figure 7-3 Secure Door Against Wall

7.2 BULKHEAD DOOR Your trailer may be equipped with a walk through bulkhead door. See figure 7-3.

Figure 7-3 Bulkhead Door On Tipper Trailer

8. I NSPECTIONS A ND L UBRICATION Routine inspections, maintenance and service must be performed on your trailer on a regular basis to insure safe and reliable operation. Inspections can be performed by a person trained in spotting potential problems. Service and repairs must be performed by a trained, qualified technician. Note: In addition to this manual, also check the relevant component manufacturer's manual.

^ WARNING

Crushing Hazard. Before performing trailer Inspections, service or maintenance: x Park trailer on firm, level surface. x Set parking brakes, turn truck engine off and remove ignition key. x Chock tires if brakes are to be released. x Support trailer with properly rated and placed stands. x Never go under the trailer body or enter the trailer while moving floor is in operation. 8.1 EVERY DAY Perform the inspections and checks before towing trailer. This list is also covered in the pre-trip inspection: x Check that ABS light on street side rear corner of the trailer is not illuminated. x Check that all safety decals are in place and in good, readable condition. x Check that all reflectors and in place and in good condition. x Check air pressure on all tires. Air pressure is listed on the Certification/VIN tag. x Check and inspect all tires. If a tire has a bald spot, bulge, cut or cords showing, replace the tire(s) before towing trailer. x Check wheel lug torque. See Section 9-3. x Check the wheel hubs for signs of lubricant leakage. x Check for broken or missing leaf springs or verify that air suspension springs are inflated. x Check electrical harness and air hoses from truck for damage. x Listen for air leaks in hoses and air suspension (if equipped). x Check brakes for wear and verify the brakes function properly. Repair or replace any worn, damaged, leaking, broken or non-functioning items before towing the trailer. x Check all lights for proper operation.

8.1.1

INSPECT TRAILER BODY, CHASSIS AND FASTENERS

1. Inspect the trailer body and chassis for damage daily. 2. Inspect all of the fasteners, welds and structural frame members for bending and other damage, cracks, or failure. Repair or replace any damaged fastener and repair the frame member. If you have any questions about the condition or method of repair of fasteners or frame members, get the recommendation of, or have the repair done by MAC Trailer or your dealer. Welds must be repaired by an qualified technician.

^ WARNING

Broken or damaged fasteners or welds can cause injury or damage to trailer and contents. Inspect for and repair all damaged parts.

Inspections And Lubrication

8.2 EVERY WEEK 8.2.1 LUBRICATION Lubricate the trailer grease fittings at least once per week.

Figure 8-1 Slack Adjusters And Brake Arms Grease Fittings

Figure 8-2 Steerable Axle Grease Fittings

Inspections And Lubrication

Figure 8-3 Rear Door Hinge Grease Fittings

Figure 8-4 Rear Door Latch Grease Fitting

8.2.2 TRAILER SUSPENSION If equipped with air ride suspension, inspect the air springs for damage. If equipped with leaf spring suspension, inspect for broken springs and equal spring arch. 8.2.3 DRAIN TRAILER AIR TANKS Drain moisture from trailer air tanks by opening petcock (A) on the bottom of each air tank. See figure 8-5. Close petcocks after draining.

Figure 8-5 Drain Trailer Air Tanks

Inspections And Lubrication

8.2.4 INSPECT, MEASURE AND ADJUST BRAKES Inspect and measure the brake linings. Replace with a quality shoe and lining if contaminated, cracked or if the lining is worn to less than ¼ inch thickness at any point. See figure 8-6.

Figure 8-6 Measure Brake Lining Chock tires and release brakes. Measure the distance (A) with brakes released. See figure 8-7. Use a lever to move slack adjuster until brakes contact the drum and measure the distance (B). Subtract distance A from distance B. The result is the free stroke. Adjust slack adjuster so the free stroke is 3/8 – 5/8 inch on each slack adjuster.

Figure 8-7 Adjust Slack Adjusters

Inspections And Lubrication

8.3 EVERY SIX MONTHS 8.3.1 AIR IN-LINE FILTER

Your trailer is equipped with air inline filters. Filters are mounted on the inside of the frame rail. Every six months, relieve the air pressure in the trailer air tanks and remove the cap (A) and filter screen (B). See figure 8-8. Clean and install filter screen and cap.

^ WARNING

Trailer air system is under pressure. Cap and screen can shoot out with force. Relieve air in the trailer air system before removing cap and screen.

Figure 8-8 Air In-Line Filter

Inspections And Lubrication

8.3.2 GLAD HAND SEALS AND SCREENS Inspect all glad hand seals (A) and screens (B) (if equipped) for damage and wear. Replace if damaged or worn. See figure 8-9.

Figure 8-9 Glad Hand Seals And Screens

9. M AINTENANCE A ND S ERVICE MAC Trailer uses components on their trailers such as landing gear, axle assemblies, tires and rims which are produced by other manufacturers. Refer to the OEM manufacturer’s information for specific maintenance instructions. If you do not have the manufacturers information, contact your dealer or MAC Trailer for assistance. Routine inspections, maintenance and service must be performed on your trailer on a regular basis to insure safe and reliable operation. Inspections can be performed by a person trained in spotting potential problems. Service and repairs must be performed by a trained, qualified technician. Note: In addition to this manual, also check the relevant component manufacturer's manual.

^ WARNING

9.1 TIRES Before each tow, be sure the tire pressure is at the value indicated on the Certification / VIN label. Tire pressure must be checked while the tire is cold. Do not check the tire pressure immediately after towing the trailer. Allow at least three hours for a tire to cool, if the trailer has been towed for as much as one mile. Replace tires that have the wear bands showing before towing trailer. A bubble, cut or bulge in a side wall can result in a tire blowout. Inspect both side walls of each tire for any bubble, cut or bulge; and replace a damaged tire before towing the trailer.

^ WARNING

Collision hazard. Worn, damaged or under-inflated tires can cause loss of control, injury and damage. Check tires before towing trailer.

9.2 WHEELS Whenever tires/wheels are removed, check the condition of the wheel, wheel lugs, hubs and studs. Replace any damaged, corroded or worn parts. Use the correct wheel lugs and wedges (if equipped) for your trailer.

^ WARNING

Wheel Failure Hazard. x Never weld on wheel or hub for any reason x Never install aluminum wheels on an axle designed for steel wheels. The stud length is greater for aluminum wheels than steel wheels. x Always use the correct lugs and wedges (if equipped).

Maintenance And Service

9.2.1 SPOKE WHEELS Lug nuts are prone to loosen right after a wheel is mounted to a hub. When driving on a remounted wheel, check to see if the lug nuts are tight after the first 50-100 miles of driving and weekly thereafter. When removing a wheel from a trailer equipped with spoke wheels, care must be taken to avoid injury.

^ WARNING

Flying Projectile Hazard. Wedges can fly out with force when removing wheel. Partially loosen wheel lugs and relieve tension on wedges before removing wheel lugs. Loosen the wheel lugs but do not remove at this time. With the wheel lugs loose, strike the wedges with a hammer to free tension on wedges. Now the wheel lugs and wedges can be removed. Install wheel, wedges and lugs. Rotate the wheel and set runout to a maximum of 1/8 inch. Evenly tighten lugs to 200-250 lb/ft of torque.

^ WARNING

Wheel Failure Hazard. Lug nuts are prone to loosen after being first assembled. Death or serious injury can result. Check lug nuts for tightness on a new trailer, and after re-mounting a wheel after the first 50-100 miles and weekly thereafter.

NOTICE

Trailer Damage. Studs, lugs and wheels can be damaged by over tightening. Do not over tighten wheel lugs.

9.2.2 DISK WHEELS Lug nuts are prone to loosen right after a wheel is mounted to a hub. When driving on a remounted wheel, check to see if the lug nuts are tight after the first 50-100 miles of driving and weekly thereafter.

^ WARNING

Lug nuts are prone to loosen after being first assembled. Death or serious injury can result. Check lug nuts for tightness on a new trailer, and after re-mounting a wheel after the first 50-100 miles and weekly thereafter. 1. Place two drops of oil to a point between the nut and flange and two drops to the two or three threads at the end of each wheel stud. 2. Tighten to 50 lb/ft of torque in the sequence shown in figure 9-1.

Maintenance And Service

3. Tighten to 450-500 lb/ft of torque in the sequence shown in figure 9-1.

Figure 9-1 Wheel Lug Torque Sequence

9.2.3 WHEEL ENDS Your trailer may be equipped with oil bath (A), grease packed (B) or Hendrickson Long-Lift System™ (HLS™) (C) wheel ends. See figure 9-2.

Figure 9-2 Wheel End Options Oil bath style wheel ends (A) use an approved drive axle lubricant gear oil for lubrication. Remove the rubber plug. Use a lubricant meeting MIL-L-2105D specifications. Either 80W-90 mineral based or 75W-90 synthetic lubricant is acceptable. Do not mix lubricants. Add lubricant to the bottom full line on hub cap. Install rubber plug. Grease packed wheel ends (B) use wheel bearing grease for lubrication. Check the axle manufacturers information regarding service and maintenance intervals. Hendrickson Long-Life System™ (HLS™) wheel ends (C) are factory lubricated with a synthetic grease. Do not add lubricant, wheel end is factory lubricated. Do not attempt to adjust bearings, they are preset at the factory. Hub removal will void the warranty. Do not remove the (HLS™) hub cap without first contacting Hendrickson.

MAC Trailer Enterprises Corporate Office 14599 Commerce Street, Alliance, Ohio 44601 800-795-8454

www.MACTrailer.com Follow us on

MAC Service • 800-297-7986 MAC Aftermarket Parts • 800-647-9424

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36

www.mactrailer.com

Made with FlippingBook Annual report maker