2.1.1.5 Limits Indicator During an active test run, an indicator will typically appear above or below the measured value in the Controller view. For example, if the active test step is “go to a compression load of 25N” a limit indicator will appear above the measured load value showing the target load of 25N.
2.1.1.6 SET HOME Function Pressing the SET HOME target automatically sets the position of the crosshead as the home position, e.g. where the test is started from. You may press the SET HOME when manually starting a test, or you may configure your test setup to automatically SET HOME when you select the START TEST target. Setting Home allows the crosshead to automatically return to this exact position for the next test run.
Shows the current load being measured by load cell sensor.
Shows the target load limit is for compression.
Shows the target load limit for this test step, e.g. 25N
Shows the current distance traveled from Home position.
Shows the current crosshead velocity
Load Limit Indicator Displays target for active test run
Manually Set Home before Start Test
You may SET HOME manually before starting the test by pressing SET HOME. Or, you can setup your test to automatically SET HOME once the START TEST target is pressed.
Pre Test Setup Menu - Set Home Option (Yes or No)
starrett.com
7
Made with FlippingBook - professional solution for displaying marketing and sales documents online