GWO Blade Repair Training Standard V2.0
2021-04-01_TS_BR_V2
Apply the lamination and curing skills gained in lesson 26 (laminate repairs) by practicing the ability to carry out laminate repairs, with minimal help from the training staff, on the leading edge
Training staff shall:
Give constructive feedback to the participants´ ability to carry out laminate repairs, with minimal help from the training staff, on the leading edge
LEADING EDGE REPAIR
Learning objectives:
The participants can perform the repairing of delamination, holes and cracks running parallel to the leading edge in accordance with a work instruction (Skills, intermediate level) The participants can act independently in safely removing damaged material from the leading edge of a blade, while creating overlaps and/or scarf joints and the correct surface finish for subsequent repair layers (Ability, intermediate level) The participants can act independently in laying up, and correctly using a vacuum and heat to cure a laminate repair on the leading edge with at least two layers of biax (Ability, intermediate level)
Training staff shall:
Demonstrate how to use a grinder to safely remove damaged material from the leading edge of a blade
Facilitate practice to improve the participants´ ability to:
a. safely remove damaged material from the leading edge of a blade, while creating overlaps and/or scarf joints and the correct surface finish for subsequent repair layers b. lay up and correctly cure with a vacuum and heat a laminate repair on the leading edge with at least two layers of biax
The participants shall:
Practice the ability to safely remove damaged material from the leading edge of a blade, while creating overlaps and/or scarf joints and the correct surface finish for subsequent repair layers Practice the ability to lay up and correctly cure with a vacuum and heat a laminate repair on the leading edge with at least two layers of biax
Training staff shall:
Give constructive fe edback on the participants’ above practice
RECREATE LEADING EDGE
Learning objectives:
The participants can perform the recreation of the leading-edge profile using filler (Skills, intermediate level)
Global Wind Organisation www.globalwindsafety.org
108 / 135
Made with FlippingBook - Online catalogs