GWO Blade Repair Training Standard V2.0
2021-04-01_TS_BR_V2
The participants can act independently in recreating the leading-edge profile using filler (Ability, intermediate level)
Training staff shall:
Demonstrate the tools and techniques that can be used to shape the filler to the approximate profile shape of the leading edge, and explain that the final profile shape will be obtained by sanding
Facilitate practice to improve the participants’ ability to:
a. apply filler to a laminate repair on the leading edge, and to shape the filler to approximately match the surrounding aerodynamic profile of the leading edge b. shape the cured filler with a sander so that it accurately matches the surrounding aerodynamic profile of the leading edge and has the correct surface finish for the adhesion of paint
The participants shall:
Practice the ability to apply filler to a laminate repair on the leading edge and to shape the filler to approximately match the surrounding aerodynamic profile of the leading edge Practice the ability to shape the cured filler with a sander so that it accurately matches the surrounding aerodynamic profile of the leading edge and has the correct surface finish for the adhesion of paint
Training staff shall:
Give constructive feedback on the participants’ above practice
SANDWICH PANEL REPAIR
180 min.
The aim of the lesson is to enable the participants to carry out laminate repairs on the inner and outer laminate of a sandwich panel safely and effectively.
After having successfully completed this lesson, the participants will be able to:
Take responsibility for carrying out laminate repairs on the inner and outer laminate of a sandwich panel safely and effectively (Ability, intermediate level)
MINIMISE RISKS ASSOCIATED WITH COMPOSITE FIBRE WORK
Learning objective:
The participants can act independently in applying the knowledge gained during the general safety module to the working environment to minimise the risks associated with composite repair work (Ability, intermediate level)
Training staff shall:
Global Wind Organisation www.globalwindsafety.org
109 / 135
Made with FlippingBook - Online catalogs