GWO Blade Repair Training Standard V2.0
2021-04-01_TS_BR_V2
Vacuum levels achieved
•
• References to documentation used during the repair • Photographs (including the size and location, site name, turbine ID number, blade serial number and technician) of: o The initial damage o The repair after damaged material has been removed o Each repair layer applied o Filler applied o Gelcoat and or paint applied
The photocard in annex 5 can be used for this purpose.
Documentation
Safety documentation
The following safety documentation is required before commencing repair activities:
Safety data sheet for each material Company-specific safety instructions
• • •
Risk assessments
Reference documentation
The following reference documentation is required before commencing repair activities:
Technical data sheet for each material Company-specific repair instructions
• •
• Blade drawings, if not included in the repair instruction
Personal Protection Equipment
The following personal protective equipment is the minimum to be expected for carrying out repair work. It must be supplemented with specifics from the safety data sheet and company-specific requirements.
Disposable coverall
• • • • •
Safety footwear Eye protection
Hearing protection Cut-resistant gloves
• Chemical-resistant gloves (specific to the materials used) • Nitrile gloves for general work • Mask (with filters specific to the materials used) • Dust mask
Tools
The following list of tools is the minimum to be expected for carrying out repair work. It must be supplemented with additional tools specific to the repair being performed.
Knife with a retractable blade
•
Global Wind Organisation www.globalwindsafety.org
127 / 135
Made with FlippingBook - Online catalogs