GWO Blade Repair Training Standard V2.0
2021-04-01_TS_BR_V2
Training staff shall:
Explain different methods for curing blade repair materials by considering the following:
a. Ambient curing
b. Curing using heat
c. Curing using UV source
Explain how to find and use the technical datasheet to determine the curing method and duration for a given chemical Emphasise that different companies can have their own work instruction to determine curing methods, and that participants should always follow applicable work instructions Ask the participants relevant questions about the difference between the curing methods listed in 14.6.1 Facilitate practice to improve the participants´ ability to use a technical data sheet to find the correct curing method and duration for a given material
The participants shall:
Explain the differences between the curing methods listed in 14.6.1
Practice the ability to use a technical data sheet to find the correct curing method and duration for a given material
Training staff shall:
Give constructive feedback on the participants´ explanations of the differences between the curing methods listed in 14.6.1 and on the participants ‘ability to use a technical data sheet to find the correct curing method and duration for a given material
TOOLS AND EQUIPMENT
40 min.
The aim of the lesson is to enable the participants to handle tools and equipment correctly in accordance with the task at hand in a safe and efficient manner.
After having successfully completed this lesson the participants will be able to:
Show an interest in handling tools and equipment required for blade inspection and repair safely and correctly (Ability, basic level)
MECHANICAL, ELECTRICAL AND PNEUMATIC PRINCIPLES
Learning objectives:
The participants can recognise basic mechanical, electrical, hydraulic principles and associated risks (Knowledge, basic level)
Global Wind Organisation www.globalwindsafety.org
54 / 135
Made with FlippingBook - Online catalogs