GWO Blade Repair Training Standard V2.0
2021-04-01_TS_BR_V2
SURFACE REPAIRS
180 min.
The aim of the lesson is to enable the participants to repair minor damage to the surface of the wind turbine blade safely and effectively.
After having successfully completed this lesson, the participants will be able to:
Take responsibility for repairing minor damage to the surface of the wind turbine blade safely and effectively (Ability, intermediate level)
MINIMISE RISKS ASSOCIATED WITH COMPOSITE FIBRE WORK
Learning objectives:
The participants can act independently in applying the knowledge gained during the general safety lessons to the working environment to minimise the risks associated with composite repair work (Ability, intermediate level) The participants can act independently in applying the knowledge gained during lesson 18 (basic lamination) (Ability, intermediate level)
Training staff shall:
Continually assess and give constructive feedback on the participants’ ability to apply the knowledge gained during the general safety module to the working environment to mitigate the risks associated with composite repair work
The participants shall:
Practice the ability to apply the knowledge gained during the general safety and chemical safety modules to their working environment by correctly selecting and using PPE appropriate to the task in hand and to work in a safe manner with the materials and tools required for each process
FILLER ADHESION
Learning objectives:
The participants can perform the preparation of the repair area in terms of filler adhesion (Skills, intermediate level) The participants can take responsibility for safely using a small grinder and a sander to remove small areas of surface damage like pin holes, scratches and cracks, and know how to create the correct surface finish for the adhesion of subsequent repair layers (Ability, intermediate level)
Training staff shall:
Demonstrate how to safely use a small grinder and a sander to remove surface damage such as pin holes, scratches and cracks, and how to create the correct surface finish for the adhesion of subsequent repair layers
Global Wind Organisation www.globalwindsafety.org
90 / 135
Made with FlippingBook - Online catalogs