109
Connections
A low - voltage power supply unit (PSU) is required and is shown in the diagram but not included with the dimmer
Need help with lighting a sign? Send a vector graphic pdf file of your sign or sign box to sales@oshino.co.uk subject line LED Wizard and we will do the rest.
Dimensions
Important:
•
Unsuitable for constant current PSUs and LEDs (e.g. 350mA,
700mASuper Orbis LED) operation
•
Not for connection to the normal ‘ Mains ’ supply
Screw terminals are provided for a low - voltage input + positive and – negative (from PSU) and output + positive and — negative (to the LED array). Avoid short circuit. Connect output to load first. Special care should be taken to prevent short circuit when screwing down stranded wires. Rotate the knob right for high- est brightness and left for lowest brightness and off.
Part no. and description LEDdim12/24 rotary dimmer switch module for 12V or 24V LED constant voltage array/strip 8A max
Dimensions in millimetres | Data subject to our Terms and Conditions and are liable to change without notice | E&OE © Oshino Lamps (UK) Limited Feb 2019
Oshino Lamps (UK) Limited
Tel 0115 964 1305 | sales@oshino.co.uk | www.oshino - lamps.co.uk
109
Made with FlippingBook Annual report