111
Gel connectors
For weather - resistant electrical connections. No need to strip the insulation back. Push the cable all the way to the stop. With all cables inserted, squeeze the cap with a pair of parallel pliers. Hold tool perpendicular to the wires and make the connection by driving the cap down flush with the top edge of the connector body Check the gel oozes out of the connector ports .
*Use caution to make sure insulation is pushed completely into connector before crimping
Part no.: XJRB A moisture resistant 3 - port wire gel crimp IDC connector designed for straight or bridge splicing. It contains three ports in a polypropylene body with tin - plated brass double IDC contact. This product is only suitable for copper conductors from 0.4mm to 0.9mm with PVC insulation. Do not use CCA (copper - coated aluminium). Use for 12V and 24V DC loads only and up to 11Amps max. Unsuitable for connection to the normal ‘ Mains ’ supply. Unsuitable for use with Super Orbis LED and constant - current LED drivers. Dims: 20 x 6.3 (closed) x 12.5mm Pack qty: 250pcs
3 - ports: two 22 - 20AWG + one 22AWG (0.5 - 0.75mm 2 )
Part no.: 314 A moisture resistant 3 - port wire gel crimp connector designed for straight or bridge splicing. It contains three ports and a double IDC contact. For two or three copper wire connections. Suitable for 0.5 - 2.0mm2 cables. Wire gauges 22 to 14. 12V and 24V DC loads up to 21Amps max and 105 o C. Also suitable for constant - current LED drivers and Super Orbis LED modules. Suitable for connection to the normal ’ Mains ’ supply. Maximum insulation OD is 3.8mm
x 3 - ports. Max 600V. 3M ™ Scotchlok ™ Dims: 24.1 x 11.9 (closed) x 23.4mm Pack qty: 50pcs
3 - ports: 22 - 14AWG (0.5 - 2.0mm 2 )
Hand Crimping Tool
Part no.: E - 9BM 3M ™ Scotchlok ™ Hand Crimping Tool E - 9BM is a heavy - duty tool that is designed for crimping all 3M ™ Scotchlok ™ Connectors. This tool has parallel closing action with adjustable jaws, and features high 10 - to - 1 mechanical advantage. Removable jaws (for 314) with hex key (not supplied). This is the appropriate tool for 314 connectors and XJRB connectors. Part qty: 1pce
Screwless terminals for two or more stranded or single - solid copper cores for normal indoor use
Part no. wire - nut 11476 blue for a combination of 3 - cores with gauges up to 3 x 1.5mm 2 (16AWG) max. For 12V DC loads only up to 14A. Unsuitable for use with Super Orbis LED modules. Unsuitable for connection to the normal ’ Mains ’ supply. Pack qty: 150pcs
Part no. 3 - way 222 - 413 lever connector block for a combination of 3 - cores with gauges up to 3 x 1.5mm 2 (16AWG) max. Suitable for use with Super Orbis LED modules. Suitable for connection to the normal ‘ Mains ’ supply. 16Amp max. Pack qty: 50pcs
Dimensions in millimetres | Data subject to our Terms and Conditions and are liable to change without notice | E&OE
© Oshino Lamps (UK) Limited Sept 2020
Oshino Lamps (UK) Limited
Tel 0115 964 1305 | sales@oshino.co.uk | www.oshino - lamps.co.uk
111
Made with FlippingBook Annual report