41
Design Guide
6096mm
Example: 48 - sheet 200mm deep 91pcs modules 186.6 module Watts 202.8 circuit Watts / 0.88A 4.9 mods / sq M 18.58 sq M 1500 lumens / sq M
Box return depth →
70 - 90
90 - 110
110 - 130
130 - 150
150 - 170
170 - 190
190 - 210
Min number of modules for uniformity in 1 sq M Number of modules for normal brightness in 1 sq M Number of modules for exhibition brightness in 1 sq M
22
16
14
8
6
5
4
6
6
↑
↑
↑
↑
↑
8
10
12
↑
↑
↑
↑
Specifications Optical and electrical data is typical unless indicated otherwise. All specs @ ta 25 o C @ 700ma / Ambient operating temp. range – 40 to 50 o C / Use only approved LED drivers
OL - SOL3 - 4000 - 1
OL - SOL3 - 5000 - 1
OL - SOL3 - 6500 - 1
Input Voltage
350mA: 0.98W (Typ.) to 1.12 (Max.) 700mA: 2.05W (Typ.) to 2.38W (Max.) 40(L) x 21(W) x 7.7mm(H)
Beam Angle
308lm (Max.)
308lm (Max.)
311lm (Max.)
J23 & J41 / 4000K / 70
HC4 / 5000K / 70
FC4 / 6250K / 70
350mA driver Wattage: 150:43min & 132miax 700mA driver Wattage: 36W:5min & 17max // 60W: 15min & 25max // 96W: 24min & 40max // 150W:39min & 62max // 200W:57min & 83max // 240W:57min & 100max
•
• • • • •
L/70 @ 54K hrs: 54,000 hrs to 70% of initial brightness when Tj does not exceed 115°C
Do Not Pull Or Twist Wires With Force Do Not Exceed Max Number Of Modules Use 314 3M Scotchlok IDC connectors Use On Aluminium or Aluminium Composite Use cable type 22AWG FT - 1 BS6231 600/1000V 0.5mm2 Heat Resisting 90 o C
• • • •
Max surface temp at Tc 65°C
Life time is reduced when max temp exceeded Maximum voltage in chain up to 500V DC Do Not Connect With Reverse Polarity
Our Design Guide is for reference only and the ideal appearance should be checked with a lit trial | Dims in millimetres | Data subject to our Terms and Conditions and are liable to change without notice | E&OE | © Oshino Lamps (UK) Limited | Sept 20
Oshino Lamps (UK) Limited
Tel 0115 964 1305 | sales@oshino.co.uk | www.oshino - lamps.co.uk
41
Made with FlippingBook Annual report