NOTE: RED IS AVAILABLE. CHANGE “G” TO “R” WHEN ORDERING
Greaseable Type Sway Bar Bushing Sets %XVKLQJVKDYHJUHDVH¿WWLQJVDQGD unique channel design which diverts grease to all inner surfaces, virtually eliminating squeaking. Use the dimen- sional drawings to determine the proper size for each application. The bolt slot dimensions were designed for 10mm or 3/8" diameter mounting bolts. Choose the sway bar bracket size that most closely matches existing bar. Bar Diameter “A” Greaseable Set
Mustang II Control Arm Bushings ENE4-3130G
Mustang II Rack Mount Bushing ENE4-10101G Mustang II Strut Rod Bushings ENE4-7113G Mustang II Tie Rod Boots Part No. Description
5/8"/16mm ENE9-5154G 11/16"/17.5mm ENE9-5155G 3/4"/19mm ENE9-5156G 13/16"/20.5mm ENE9-5157G 7/8"/22mm ENE9-5158G 15/16"/24mm ENE9-5160G 1"/25mm ENE9-5161G 1-1/16"/27mm ENE9-5162G 1-1/8"/28.5mm ENE9-5164G 1-1/4"/31.5mm ENE9-5165G
ENE9-13101G Black Mustang II Tie Rod Boots, Pair ENE9-13101R Red Mustang II Tie Rod Boots, Pair Complete End Link Kits The set includes bushings, zinc plated 3/8" grade 5 bolts, “nylock” nuts and heavy gauge washers. To Determine Fit: Vehicle must be on level ground (not jacked up) with wheels supporting it. Make sure stabilizer bar and eyelet (B) are parallel to control arm (C). Many times they are not. You may be required to use a slightly longer or shorter sleeve length than the RULJLQDO0HDVXUHVOHHYHOHQJWK $ DQGFRPSDUHWRWKHFKDUWWR¿QG the correct set. “A” Length Set Number 1" ENE9-8122G 1-5/8" ENE9-8120G 2" ENE9-8123G
Non-Greaseable Type Sway Bar Bushing Sets
Economical HYPER-FLEX ™ bushings with matching heavy gauge brackets deliver maximum performance for a vehicle’s sway bar system. Use the dimension drawings to determine the proper size IRUDSSOLFDWLRQ7KHEROWVORWGLPHQVLRQV¿WPPRUGLDPHWHU mounting bolts. Choose the sway bar bracket size that most closely matches existing bar.
2-3/8" ENE9-8125G 2-5/8" ENE9-8117G 2-7/8" ENE9-8118G 3-3/8" ENE9-8119G 3-9/16" ENE9-8124G 4-1/2" ENE9-8121G
Drawing 1
Drawing 2
Drawing 1 Type Non-Greaseable
Drawing 2 Type Non-Greaseable ENE9-5104G ENE9-5105G ENE9-5106G ENE9-5107G
Bar Diameter “A”
5/8"/16mm
— —
1960-72 Chevy C-10 Truck Rear Tracking Arm Bushing Set ENE3-7104G
11/16"/17.5mm
3/4"/19mm
ENE9-5123G
13/16"/20.5mm
—
21mm
ENE9-5125G ENE9-5126G
—
7/8"/22mm
ENE9-5108G
23mm
—
—
15/16"/24mm
ENE9-5128G ENE9-5129G
ENE9-5109G ENE9-5110G ENE9-5111G ENE9-5112G ENE9-5113G ENE9-5116G ENE9-5114G
1"/25mm
1-1/16"/27mm 1-1/8"/28.5mm 1-1/4"/31.5mm
— — — — —
32mm
1 5/16"/33mm
173 2018 HOT ROD AND EARLY MUSCLE
Made with FlippingBook flipbook maker